“One Owner Machine only 9379 Cutting Hours, Fully powered / tested & in Great working condition. Equipped with Barfeeder, 2 X Hydraulic Chucks, Full C Axis, Milling, Sub Spindle and Y Axis. Comes with chip conveyor, parts Conveyor, manuals, live tool holder and Barfeeder.”
Daewoo Puma 1500SY CNC Turn Mill Center
Out of stock
Description
| DAEWOO PUMA 1500SY CNC TURN MILL CENTER | |
|---|---|
| Make | Daewoo |
| Model No. | Puma 1500SY |
| Year | 2004.05 |
| Serial # | P150SY0289 |
| Condition | Very Good. |
| Country of Origin: | Korea |
Comes with Bar Feeder, Chip Blaster Unit, Chip, Parts Conveyor
Manuals, Live Tool Holders and Tooling.
All specifications are approximations and are subject to verification.
“One Owner Machine only 9379 Cutting Hours, Fully powered / tested & in Great working condition. Equipped with Barfeeder, 2 X Hydraulic Chucks, Full C Axis, Milling, Sub Spindle and Y Axis. Comes with chip conveyor, parts Conveyor, manuals, live tool holder and Barfeeder.”
- DAEWOO PUMA 1500SY Equipped With:
- 12-Station Turret – Live / Rotary Tools
- Servo Controlled Full C-Axis on Both Spindles
- Fanuc 18iT CNC Control
- PCMCIA Card Slot
- Tool Presetter
- Parts Catcher
- 3 Live tools with machine
- Parts Conveyor
- ATS Collet Chuck on Main Spindle
- 3 Jaw Chuck on Sub Spindle
- Rigid Tapping on Both Spindles
- Foot Operated Control for Chuck
- Turbo Systems Chip Conveyor
- Comes with Bar Feeder.
- Comes with Live Tools & some Static Tool Holders.
- All Available Manuals, Tool Holders and Tooling.
- DAEWOO PUMA 1500SY Specifications:
- Max. Turning Diameter: 13.0″
- Max. Swing over Bed: 23.6″
- Max. Turning Length: 20.10″
- Max. Bar Capacity: 1.75″
- X-Axis Travel: 9.84″
- Y Axis Travel: 4.0″
- Z-Axis Travel: 22.80″
- Z2- Sub Spindle Travels: 22.80″
- C-Axis: 360 Degree (0.001) on Both Spindle
- X Rapid Traverse Rate: 790 Inch Per Minute
- Z Rapid Traverse Rate: 945 Inch Per Minute
- Y Rapid Traverse Rate: 295 Inch Per Minute
- Spindle Bore: 2.00″
- Sub Spindle Bore: 1.77″
- Main Spindle Nose: A2-5
- Sub Spindle Nose: A2-5
- Main Spindle Speed: 60-6000 RPM
- Sub Spindle Speed: 60-6000 RPM
- Main Spindle Power: 20 HP
- Sub Spindle Power: 15 HP
- 12 Tools Turret with ER type Collet Tools
- Indexing Time: 0.5 Second
- Live Tool Speed: 50-5,000 RPM”
- Live Tool Motor: 7.5 kw
- Power Source: AC 200/220 V, Three Phase, 50/60 Hz
- Power Requirement: 40 kva
- Weight : 11500 lbs Approx.
- Overall Dimensions: 120″ x 72″ x 90″ High
- Overall Dimensions: 136″ x 72″ x 90″ High with Chip Conveyor
DAEWOO PUMA 1500SY Comes as shown in pictures.
