“This One Owner machine is in good running condition. It is equipped with 8″ Chuck, Tailstock ,Chip Conveyor and tool holders. On Our Floor fully powered / tested & is in Great working condition.”
Daewoo Puma 230 CNC Turning Center
Out of stock
Description
DAEWOO PUMA 230 CNC TURNING CENTER LATHE | |
---|---|
Make | Daewoo |
Model No. | Puma 230 |
Serial # | P201340 |
Condition | Very Good |
Comes with 8″ Chuck, Tool Holders, Tailstock & Chip Conveyor.
“This One Owner machine is in good running condition. It is equipped with 8″ Chuck, Tailstock ,Chip Conveyor and tool holders. On Our Floor fully powered / tested & is in Great working condition.”
- DAEWOO PUMA 230 Equipped With:
- Fanuc 21iT CNC Control
- 8″ Kitagawa 3 Jaw Hydraulic Chuck ( 10″ Capable )
- A2-8 Spindle
- Auto Tool Presetter
- Hydraulic Programmable Tailstock
- Coolant System
- Barfeed Interface
- RS-232 ports
- 12 Station Automatic Turret
- Foot Switch
- Turbo Chip Conveyor
- General:
- Power: 35 kva, 220v / 3-Phase
- Overall Dimensions: 117″ x 62″ x 72″ High
- Overall Dimensions: 130″ x 62″ x 72″ High with Chip Conveyor
- Weight: 9500 lbs
- DAEWOO PUMA 230 Specifications:
- Capacity:
- Max Turning Diameter: 13.78″
- Max Turning Length: 21.57″
- Max Bar Capacity: 3.0″
- Swing Over Bed: 21.0″
- Distance Between Centers: 26.3″
- X Axis Travel: 9.53″
- Z Axis Travel: 22.83″
- Rapid Traverse X Axis: 787 IPM
- Rapid Traverse Z Axis: 1000 IPM
- Spindle Nose: A2-8
- Spindle Bore: 3.53″
- Spindle Speed: 35 – 3500 RPM
- Spindle Motor: 25 HP
- Turret Capacity: 12 Stations
- Turret Index Time: 0.5 Second
- Tailstock Taper: MT-4
- Tailstock Quill Dia.: 2.9″
- Tailstock Quill Travel: 3.15″
DAEWOO PUMA 230 Comes as shown in pictures..