“This One Owner machine is in good running condition. It is equipped with 10″ Chuck, Tailstock ,Chip Conveyor. On Our Floor fully powered / tested & is in Great working condition.”
Daewoo Puma 250L CNC Turning Center
Out of stock
Description
| DAEWOO PUMA 250L CNC TURNING CENTER | |
|---|---|
| Make | Daewoo |
| Model No. | Puma 250LB |
| Serial # | P25L0109 |
| Condition | Very Good |
Comes with 10″ Chuck, Tailstock & Chip Conveyor
All specifications are approximations and are subject to verification.
“This One Owner machine is in good running condition. It is equipped with 10″ Chuck, Tailstock ,Chip Conveyor. On Our Floor fully powered / tested & is in Great working condition.”
- DAEWOO PUMA 250L Equipped With:
- Fanuc 18T CNC Control
- 10″ Kitagawa 3 Jaw Hydraulic Chuck ( 12″ Capable )
- A2-8 Spindle
- Auto Tool Presetter
- Hydraulic Programmable Tailstock
- Coolant System
- Barfeed Interface
- RS-232 ports
- 10 Station Automatic Turret
- Foot Switch
- Turbo Chip Conveyor
- General:
- Power: 45 kva, 220v / 3-Phase
- Overall Dimensions: 150″ x 77″ x 80″ High
- Overall Dimensions: 168″ x 77″ x 80″ High with Chip Conveyor
- Weight: 13500 lbs
- DAEWOO PUMA 250L Specifications:
- Capacity:
- Max Turning Diameter: 15.57″
- Max Turning Length: 51.8″
- Max Bar Capacity: 3.0″
- Swing Over Bed: 22.4″
- Distance Between Centers: 54″
- X Axis Travel: 11.1″
- Z Axis Travel: 52.36″
- Rapid Traverse X Axis: 787 IPM
- Rapid Traverse Z Axis: 945 IPM
- Spindle Nose: A2-8
- Spindle Bore: 3.53″
- Spindle Speed: 0 – 3500 RPM
- Spindle Motor: 30 HP
- Turret Capacity: 10 Stations
- Turret Index Time: 1 Second
- Tailstock Taper: MT-5
- Tailstock Quill Dia.: 3.9″
- Tailstock Quill Travel: 4.0″
DAEWOO PUMA 250L Comes as shown in pictures..
