Haas VF-3B VMC 4TH Axis Ready

“This One Owner Machine was cutting Aluminium only. Equipped with 7500rpm, Original Paint Machine, 4th Axis Ready. Cutting Hours 5582 Only. On our Floor now, fully powered / tested & is in Great working condition.”

• HAAS VF-3B VMC Features:
• 20HP High Torque Spindle Motor
• 4th Axis Ready ( drives and wiring installed )
• Rigid Tapping
• High Speed Machining
• Advanced Tool Management
• Power Failure Detection Module
• User Definable Macros, Spindle Orientation and Coordinate Rotational Scaling
• Brush-type servo drive motors on all axis
• 20 + 1 automatic tool changer
• Programmable coolant
• Telescopic way covers
• Chip auger
• Floppy Drive
• Flood Coolant system
• Original Books

• HAAS VF-3B VMC Specifications:
• Travels:
• X-Axis: 40″
• Y-Axis: 20″
• Z-Axis: 25″
• Rapid Traverse Rates: 7100 Inch Per Minute
• Cutting Feed Rates: 500 Inch Per Minute
• Spindle Nose to Table (Min.- Max.): 4″ – 29″

• Table:
• Length: 48″
• Width: 18″
• Number of Std T-Slots: 5
• T-Slot Width: 5/8″
• Max Weight on Table: 1500 lbs

• Spindle:
• Taper Size: CAT 40
• Speed Range: 0 – 7500 RPM
• Spindle Power: 20 HP Vector Dual Drive
• Max Torque: 90ft-lb @ 2000RPM

• Automatic Tool Changer:
• Capacity: 20 + 1
• Max Tool Weight: 12 lbs
• Max Tool Dia: 3.6″
• Max Tool Length: 13″
• Tool Changing Time: 3.2 Seconds

• General:
• Air Required: 100 psi, 4 scfm
• Power: 220v / 66FLA / 3-Phase
• Overall Dimensions: 118″ x 96″ x 100″ High
• Weight: 12500 lbs