“This One Owner Machine is in Excellent Condition. X,Z,C,Y & B Axis 42 Tools W/Seicos 16T (Fanuc 16iT) Control 5 Axis Turn Mill Center is loaded with Features. On our Floor now, fully powered / tested & is in Great working condition. Check VIDEO. Contact us for more photos and video.”
Hitachi Seiki HiCell CH 250 5Axis Turning Center
Out of stock
Description
| HITACHI SEIKI HICELL CH 250 CNC TURNING CENTER | |
|---|---|
| Make | Hitachi Seiki |
| Model No. | CH-250 |
| Year of Manufacture: | 2001 |
| Serial # | CH20170 |
| Condition | Very Good |
| Made in Japan | |
Comes with All Original Manuals, Chucks, 20 Tool Holders, & Chip Conveyor.
All specifications are approximations and are subject to verification.
“This One Owner Machine is in Excellent Condition. X,Z,C,Y & B Axis 42 Tools W/Seicos 16T (Fanuc 16iT) Control 5 Axis Turn Mill Center is loaded with Features. On our Floor now, fully powered / tested & is in Great working condition. Contact us for more photos and video.”
- HITACHI SEIKI HICELL CH 250 Equipped With:
- Seicos 16T (Fanuc 16iT) CNC Control
- 10.4″ Color Display
- 2 x 20 Station Tool Magazine
- Rigid Tapping
- Programmable Main & Sub Spindle with Full C Axis
- Built in High Torque Motor on Headstock
- 10″ MMK Hydraulic Main Chuck
- 8″ MMK Hydraulic Sub Spindle Chuck
- Parts Catcher
- PCMCIA Card Slot
- Hi Pressure Coolant System
- Barfeed Interface
- RS-232 ports
- Chip Conveyor
- Comes with All Original Manuals, 10″ & 8″ Chucks, 20 Tool Holders, & Chip Conveyor.
- General:
- Power: 36 kva, 220v / 3-Phase
- Overall Dimensions: 130″ x 76″ x 90″ High
- Overall Dimensions: 178″ x 76″ x 90″ High with Chip Conveyor on Right Side
- Weight: 17600 lbs
- HITACHI SEIKI HICELL CH 250 Specifications:
- Capacity:
- Max Turning Diameter: 19.68″
- Max Turning Diameter with Rotating Tool: 14.56″
- Max Turning Length: 28.34″
- Max Bar Capacity Main Spindle: 2.56″
- Max Bar Capacity Sub Spindle: 1.65″
- Swing Over Bed: 19.68″
- X Axis Travel: 23.62″
- Z Axis Travel: 39.37″
- Y Axis Travel: 5.90″ (+/-2.95″)
- B Axis: 0.001°
- C Axis Main & Sub Spindle: .001
- Rapid Traverse X & Z Axis: 1181 IPM
- Rapid Traverse Y Axis: 590 IPM
- Spindle Nose: A2-8
- Spindle Bore: 3.07″
- Spindle Speed: 0 – 4000 RPM
- Spindle Motor: 25/20 HP
- Sub Spindle Motor: 10/7.5 HP
- Milling Spindle Speed: 80-8000 RPM
- Milling Motor: 10/705 HP
- Milling Spindle Taper: NT40 Short Taper
- Tool Capacity: 42 ( 2 x 20 Stations )
- Max Tool Diameter: 4″
- Max Tool Length: 9.84″
- Max Tool Weight: 15lbs
HITACHI SEIKI HICELL CH 250 Comes as shown in pictures.
