Product Description

MAZAK INTEGREX 200-IV ST CNC MULTI AXIS TURNING LIVE TOOL LATHE

Make: MAZAK
Model No.: Integrex 200-IV ST
Serial No.:
YEAR: 2006
Condition: Very Good

Comes with  8″ Chucks, Tool Holders, Chip Conveyor & Manuals

All specifications are approximations, and are subject to verification.

“One Our Floor, Fully powered / tested & in Good working condition. Only 14,373 Cutting Hours. Equipped with 2 Chucks, Full C Axis, Milling, Sub Spindle, Second Turret and Y Axis. Comes with Parts & chip conveyor, Manuals.”
——————————————————-

MAZAK Integrex 200-IV ST CNC Equipped With:

• Mazatrol Matrix CNC Control
• 12000 RPM Pendulum Milling Head
• 40 Tools Automatic Tool Changer
• Servo Controlled Full C-Axis on Both Spindles
• 9 Station Lower Turret
• Y Axis Capability
• PCMCIA Card Slot
• USB LAN Options
• EIA/ISO Programming
• 3D Coordinate Conversion
• 8″ Big Bore Chuck on Main Spindle
• 8″ Chuck on Sub Spindle
• Rigid Tapping on Both Spindles
• Foot Operated Control for Chuck
• High Pressure Coolant System
• Chip Conveyor
• Inbuilt Transformer
• Chiller Unit
• Comes with Tools, Chip Conveyor, Books & Manuals.

MAZAK Integrex 200-IV ST CNC Specifications:

Capacity:
Max Turning Diameter Upper Turret : 26.00″
Max Turning Diameter Lower Turret : 10.24″
Max Swing Upper Turret : 26.0″
Max Swing with Y Axis : 19.70″
Max Swing over Cross Slide : 26.0″
Max Turning Length: 40.00″
Max Bar Capacity Main Spindle : 2.55″
Max Bar Capacity Sub Spindle : 2.55″
Max Weight on Main & Sub Spindle : 660 lbs

Travels:
X1 Axis Travel Upper : 22.83″
X2 Axis Travel Lower : 5.91″
Z1 Axis Travel Upper : 41.14″
Z2 Axis Travel Lower : 38.98″
Y Axis Travel: 6.30″
W Axis Travel: 41.34″ ( Sub Spindle )
C Axis: 360° (0.001°) Both Spindle

Feedrate:
Rapid Traverse X Axis: 1496 IPM
Rapid Traverse Z Axis: 1496 IPM
Rapid Traverse Y Axis: 1023 IPM
Rapid Traverse B Axis: 1181 IPM

Spindle:
Main Spindle Bore: 2.99″
Sub Spindle Bore: 2.99″
Main Spindle Nose: A2-6
Sub Spindle Nose: A2-6
Main Spindle Speed: 35-5000 RPM
Sub Spindle Speed: 35-5000 RPM
Main Spindle Power: 22 kw
Sub Spindle Power: 18.5 kw

Milling Head:
Single Station Pendulum Head with 40 ATC
Tool Type: KM-63, 40 Taper

Spindle Speed: 15-12000 RPM
Spindle Motor: 18.5 kw
Spindle 90° Index Time: 0.5 Sec

Lower Turret:
Capacity: 9 Stations
Turret Index Time: 0.14 Second
OD Tool Size: 1.00″
ID Tool Size : 1.26″

General:
Power: 67 kva, 220v / 3-Phase
Air Required: 71 PSI
Overall Dimensions: 160″ x 93″ x 102″ High
Overall Dimensions: 200″ x 93″ x 102″ High with Chip Conveyor
Weight: 25,500 lbs

MAZAK Integrex 200-IV ST CNC Comes as shown in pictures..