“This One Owner Machine has only 3570 Cutting Hours, Thru Spindle Coolant, 12,000 RPM, 30 Tool changer, Probing system, 4th Axis Ready, expanded Memory and many more features. All Original Paint, ran mostly on Aluminium. On our Floor now fully powered / tested & is in Great working condition.”
Doosan DNM-500II CNC Vertical Machining Center
Out of stock
Description
| DOOSAN DNM-500II CNC VERTICAL MACHINING CENTER | |
|---|---|
| Make | DOOSAN |
| Model No. | DNM-500II |
| Year Installed: | 2014 |
| Serial # | MV0010 |
| Condition | Very Good |
All specifications are approximations and are subject to verification.
- Doosan DNM-500II Features:
- Fanuc Oi-MD series CNC Control
- 12,000 RPM High Precision Spindle
- Through Spindle Coolant
- CAT-40 Big Plus Spindle
- 4th Axis Ready ( Wiring & Drive Installed )
- Renishaw Probing and Wear Systems
- Speed Loc Jig Table Installed
- MPG Control
- 30 Tools Bidirectional Tool Changer
- Tool Load Monitoring
- PCMCIA Card Slot
- USB, RS-232 & Ethernet Connectivity
- Spindle Chiller Unit
- Wide Spaced Linear Guides Way Construction
- Powerful 15 kw high torque spindle motor
- Spindle Orientation
- Rigid Tapping
- Helical Interpolation
- Fast Rapid Traverse Rate
- High Flow coolant with large separate coolant tank
- Work light
- Double Auger System
- Chip Conveyor
- Original Books and Manuals
- Doosan DNM-500II Specifications:
- Travels:
- X-Axis: 40.2″
- Y-Axis: 21.3″
- Z-Axis: 20.1″
- Spindle Nose to Table (Min.- Max.): 5.91″ – 30.5″
- Table:
- Length: 47.5″
- Width: 21.5″
- Max Weight on Table: 1765 lbs
- T-Slot no. & Width: 4 X 0.7″
- Spindle:
- Taper Size: CAT-40 Big Plus
- Speed Range: 60 – 12,000 RPM
- Spindle Power: 15 kw
- Feed rates:
- Rapid X,Y & Z: 1417 inch/Per Minute
- Cutting Feedrate: 595″ inch/ Per Minute
- Automatic Tool Changer:
- 40 Taper
- Capacity: 30
- Max Tool Weight: 17.6 lbs
- Max Tool Length: 11.8″
- Max Tool Dia.: 5.9″
- Tool Change Time: 1.5 second
- General:
- Air Required: 90 psi, 4 scfm
- Power: 205-220v / 50kva / 3-Phase
- Overall Dimensions: 142″ x 101″ x 110″ High
- Weight: 14000 lbs
Doosan DNM-500II Comes as shown in pictures.
