“This One Owner Machine has 7500rpm, 24 tool side mount tool changer, 4th Axis Ready, 1MB Memory. On our Floor now, fully powered / tested & is in Great working condition. ”
Haas VF 6D/40 VMC 4th Axis Ready
Out of stock
Description
HAAS VF 6D VERTICAL MACHINING CENTER | |
---|---|
Make | Haas |
Model No. | VF-6D/40 |
Year of Manufacture: | 2006 |
Serial # | 46831 |
Condition | Very Good |
“This One Owner Machine has 7500rpm, 24 tool side mount tool changer, 4th Axis Ready, 1MB Memory. Spindle Hours 2030 Only. On our Floor now, fully powered / tested & is in Great working condition. check *VIDEO*”
- HAAS VF 6D Features:
- 20HP High Torque Spindle Motor
- 4th Axis Ready ( drives and wiring installed )
- 1 MB Program Memory
- Remote Jog Handle
- Rigid Tapping
- High Speed Machining
- Advanced Tool Management
- Power Failure Detection Module
- User Definable Macros, Spindle Orientation and Coordinate Rotational Scaling
- Brush-type servo drive motors on all axis
- 24 + 1 automatic Side Mount tool changer
- Programmable coolant
- Telescopic way covers
- Chip auger
- Floppy Drive
- Flood Coolant system
- HAAS VF 6D Specifications:
- Travels:
- X-Axis: 64″
- Y-Axis: 32″
- Z-Axis: 30″
- Rapid Traverse Rates: 600 Inch Per Minute
- Cutting Feed Rates: 500 Inch Per Minute
- Spindle Nose to Table (Min.- Max.): 4″ – 34″
- Table:
- Length: 64″
- Width: 28″
- Number of Std T-Slots: 5
- T-Slot Width: 5/8″
- Max Weight on Table: 4000 lbs
- Spindle:
- Taper Size: CAT 40
- Speed Range: 0 – 7500 RPM
- Spindle Power: 20 HP Vector Dual Drive
- Max Torque: 90ft-lb @ 2000RPM
- Automatic Tool Changer:
- Capacity: 24 + 1
- Max Tool Weight: 12 lbs
- Max Tool Dia: 6″
- Max Tool Length: 16″
- Tool Changing Time: 2.8 Seconds
- General:
- Air Required: 100 psi, 4 scfm
- Power: 220v / 66FLA / 3-Phase
- Overall Dimensions: 158″ x 98″ x 118″ High
- Weight: 22000 lbs
HAAS VF 6D Comes as shown in pictures..