This One Owner Haas Vf5 has 10000rpm, thru coolant spindle, 24 tool side mount tool changer, 4th Axis Ready, 1MB Memory and New X Axis Ballscrew ($4000). On our Floor now, fully powered / tested & is in Great working condition. check *VIDEO*.
Haas VF5 Vertical Machining Center
Out of stock
Description
HAAS VF5 VERTICAL MACHINING CENTER | |
---|---|
Make | Haas VF5 |
Model No. | VF5 |
Year of Manufacture: | 10 2001 |
Serial # | 27027 |
Condition | Very Good |
This One Owner Haas Vf5 has 10000rpm, thru coolant spindle, 24 tool side mount tool changer, 4th Axis Ready, 1MB Memory and New X Axis Ballscrew ($4000). On our Floor now, fully powered / tested & is in Great working condition. check *VIDEO*.
- HAAS VF5 VERTICAL MACHINING CENTER Features:
- 30HP High Torque Spindle Motor
- Through-Spindle Coolant system
- 4th Axis Ready ( drives and wiring installed )
- 1 MB Program Memory
- Remote Jog Handle
- Rigid Tapping
- High Speed Machining
- Advanced Tool Management
- Power Failure Detection Module
- User Definable Macros, Spindle Orientation and Coordinate Rotational Scaling
- Brush-type servo drive motors on all axis
- 24 automatic Side Mount tool changer
- Programmable coolant
- Telescopic way covers
- Chip auger
- Floppy Drive
- High Intensity Lighting
- 95-gallon flood Coolant system
- New X Axis BallScrew Installed in Nov-16 for $4000 Cost.
- HAAS VF5 Specifications:
- Travels:
- X-Axis: 50″
- Y-Axis: 26″
- Z-Axis: 25″
- Rapid Traverse Rates: 1000 Inch Per Minute
- Cutting Feed Rates: 650 IPM
- Spindle Nose to Table (Min.- Max.): 4″ – 29″
- Table:
- Length: 52″
- Width: 23″
- Number of Std T-Slots: 7
- T-Slot Width: 5/8″
- Max Weight on Table: 4000 lbs
- Spindle:
- Taper Size: CAT 40
- Speed Range: 0 – 10000 RPM
- Spindle Power: 30 HP
- Max Torque: 90ft-lb @ 2000RPM
- Automatic Tool Changer:
- Capacity: 24
- Max Tool Weight: 12 lbs
- Max Tool Dia: 6″
- Max Tool Length: 16″
- Tool Changing Time: 3.0 Seconds
- General:
- Air Required: 100 psi, 4 scfm
- Power: 220v / 66FLA / 3-Phase
- Overall Dimensions: 136″ x 100″ x 105″ High
- Weight: 16000 lbs
HAAS VF5 VERTICAL MACHINING CENTER Comes as shown in pictures.