Used Detron DFO- GXA170S -Fanuc CNC Rotary Table for Sale. This Detron DFO- GXA170S -Fanuc has minimal cutting hours and is in almost new condition.
| Make | Detron |
| Model: | DFO-GXA170S |
| Video: | No Video |
Detron DFO- GXA170S -Fanuc CNC Rotary Table
Out of stock
Description
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Detron |
| Model: | GXA170S |
| Features: |
|---|
| Worktable diameter Ø125, Ø170, Ø210, Ø255. |
| Exclusive patented dual pneumatic piston braking system. |
| Higher rotation speed. |
| Equipped with high precision cross roller. |
| Full gear depth transmitted by dual lead worm drive, resulting in higher efficiency and lower backlash. |
| Specification: |
|---|
| Worktable Diameter: 6.69″ |
| Center Bore Diameter: 1.57H7 |
| Through-Bore Diameter: 1.57H7 |
| Pitch of Rotary Axis: N/A |
| Height of Table (Horizontal): 6.89″ |
| Height of Table (Vertical): 5.31″ |
| Width of T-Slot: 0.47H7 |
| Width of Guide Block: 0.55″ |
| Clamping Method/Pressure: Pneumatic/79.8psi-101.5psi |
| Clamping Torque: 300 ft.lbs. |
| Transmission Ratio: 1/60 |
| Maximum Table Speed: 53.3 min-1 |
| Standard Loading Inertia: 0.72 Kg.m2 |
| Maximum Loading Inertia: 3 Kg.m2 |
| Resolution: 0.001 Degree |
| Indexing Accuracy: 20 sec |
| Repeatability: 6 sec |
| Net Weight (Servo Motor Excluded): 114.4 lbs |
| Allowable Loading Capacity |
| Vertical: 220 lb |
| Horizontal: 440 lb |
| Tailstock Applied: 440 lb |
| Allowable Cutting Torque: 147.41 ft. lbs. |
| Allowable Maximum Rotary Joint Quantity: 4 |
