“One Owner Machine only 4809 Cutting Hours, Fully powered / tested & in Great working condition. Equipped with Barfeeder, 2 X Hydraulic Chucks, Full C Axis, Milling, Sub Spindle and Y Axis. Comes with chip conveyor, parts Conveyor, manuals, live tool holder and Barfeeder.”
Daewoo Puma 2000SY CNC Turn Mill Center
Out of stock
Description
| DAEWOO PUMA 2000SY CNC TURN MILL CENTER | |
|---|---|
| Make | Daewoo |
| Model No. | Puma 2000SY |
| Year | 2004.05 |
| Serial # | P200SY0259 |
| Condition | Very Good. |
| Country of Origin: | Korea |
Comes with Bar Feeder, Chip Blaster Unit, Chip, Parts Conveyor
Manuals, Live Tool Holders and Tooling.
All specifications are approximations and are subject to verification.
“One Owner Machine only 4809 Cutting Hours, Fully powered / tested & in Great working condition. Equipped with Barfeeder, 2 X Hydraulic Chucks, Full C Axis, Milling, Sub Spindle and Y Axis. Comes with chip conveyor, parts Conveyor, manuals, live tool holder and Barfeeder.”
- DAEWOO PUMA 2000SY Equipped With:
- 12-Station Turret – Live / Rotary Tools ( 3 Live Tools )
- Servo Controlled Full C-Axis on Both Spindles
- Big Bore Collet Chuck on both Spindles
- Fanuc 18iT CNC Control
- PCMCIA Card Slot
- Tool Presetter
- Parts Catcher
- Parts Conveyor
- ATS Collet Chuck on Main Spindle
- Rigid Tapping on Both Spindles
- Foot Operated Control for Chuck
- Turbo Systems Chip Conveyor
- Comes with LNS Bar Feeder
- Comes with 3 X Live Tools & some Static Tool Holders.
- All Available Manuals, Tool Holders and Tooling.
- General:
- Power Source: AC 200/220 V, Three Phase, 50/60 Hz
- Power Requirement: 40 kva
- Weight : 11500 lbs Approx.
- Overall Dimensions: 120″ x 72″ x 90″ High
- Overall Dimensions: 136″ x 72″ x 90″ High with Chip Conveyor
- DAEWOO PUMA 2000SY Specifications:
- Capacity:
- Max. Turning Diameter: 13.0″
- Max. Swing over Bed: 23.6″
- Max. Turning Length: 20.10″
- Max. Bar Capacity: 2.625″
- Distance Between Spindles: 33.8″
- X-Axis Travel: 9.84″
- Y Axis Travel: 5.84″
- Z-Axis Travel: 22.83″
- B- Sub Spindle Travels: 22.83″
- C-Axis: 360 Degree (0.001) on Both Spindle
- X Rapid Traverse Rate: 790 Inch Per Minute
- Z Rapid Traverse Rate: 945 Inch Per Minute
- Y Rapid Traverse Rate: 295 Inch Per Minute
- Spindle Bore: 3.00″
- Sub Spindle Bore: 1.77″
- Main Spindle Nose: A2-6
- Sub Spindle Nose: A2-5
- Main Spindle Speed: 45-4500 RPM
- Sub Spindle Speed: 60-6000 RPM
- Main Spindle Power: 20 HP
- Sub Spindle Power: 15 HP
- 12 Tools Turret with ER type Collet Tools
- Indexing Time: 0.5 Second
- Live Tool Speed: 60-6,000 RPM”
- Live Tool Motor: 3.7 kw
DAEWOO PUMA 2000SY Comes as shown in pictures..
