“One Owner Machine equipped with Auto Pallet Changer, Gear Head Spindle, 7500rpm, 32 Tool Changer, 4th Axis Ready. On our Floor now, fully powered / tested & is in Great working condition.”
HAAS VF-3 APC Vertical Machining Center
Out of stock
Description
HAAS VF-3 APC VERTICAL MACHINING CENTER | |
---|---|
Make | Haas |
Model No. | VF-3 APC |
Year of Manufacture: | 05/99 |
Serial # | 17659 |
Condition | Very Good |
“One Owner Machine equipped with Auto Pallet Changer, Gear Head Spindle, 7500rpm, 32 Tool Changer, 4th Axis Ready. On our Floor now, fully powered / tested & is in Great working condition.”
- HAAS VF-3 APC VMC Features:
- 20HP High Torque Geared Head Spindle
- 2 Speed Gearbox
- 4th Axis Ready ( drives and wiring installed )
- 1MB Expanded Memory
- Auto Pallet Changer
- Rigid Tapping
- Jig Plate on Both Table
- User Definable Macros, Spindle Orientation and Coordinate Rotational Scaling
- 32 + 1 Automatic tool changer Upgrade
- Programmable coolant
- Telescopic way covers
- Chip auger
- USB Drive
- Flood Coolant system
- HAAS VF-3 APC VMC Specifications:
- Travels:
- X-Axis: 40″
- Y-Axis: 20″
- Z-Axis: 25″
- Rapid Traverse Rates: 710 Inch Per Minute
- Cutting Feed Rates: 500 Inch Per Minute
- Spindle Nose to Table (Min.- Max.): 4″ – 29″
- Table:
- Length: 48″
- Width: 18″
- Number of Std T-Slots: 5
- T-Slot Width: 5/8″
- Max Weight on Table: 1500 lbs
- Spindle:
- Taper Size: 40
- Speed Range: 0 – 7500 RPM
- Spindle Type: Gear Head
- Spindle Power: 20 HP Vector Dual Drive
- Max Torque: 90ft-lb @ 2000 RPM
- Automatic Tool Changer:
- Capacity: 32 + 1
- Max Tool Weight: 12 lbs
- Max Tool Dia: 3.6″
- Max Tool Length: 13″
- Tool Changing Time: 4.2 Seconds
- General:
- Air Required: 100 psi, 4 scfm
- Power: 220v / 66FLA / 3-Phase
- Overall Dimensions of Machine: 118″ x 98″ x 100″ High
- Weight: 12,500 lbs
HAAS VF-3 APC VMC Comes as shown in pictures..