SKU: | 7034 |
Make/Model: | Doosan DNM-400II |
Year: | 2013 |
Video: | No Video |
$39,500.00
Out of stock
SKU: | 7034 |
Make/Model: | Doosan DNM-400II |
Year: | 2013 |
Video: | No Video |
Out of stock
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
Make: | Doosan |
Model: | DNM-400II |
Year: | 2013 |
Cutting Time: | 6127 Hours |
Condition: | Used – Good |
Features: |
---|
Doosan Fanuc i-series CNC Control |
Through Spindle Coolant |
8,000 RPM Spindle |
USB Drive |
Probing System |
Tool Presetter |
1417 Inch Per Min Rapids |
PCMCIA Card Slot |
Rigid Tapping |
Spindle Orientation |
30 Automatic high speed tool changer |
Coolant System |
Spindle Chiller Unit |
Telescopic way covers |
Chip Conveyor |
Dual Augers |
Travels: |
---|
X-Axis: 30.2″ |
Y-Axis: 17.1″ |
Z-Axis: 20.1″ |
Rapid Traverse Rates X, Y Axis: 1417 Inch Per Minute |
Rapid Traverse Rates Z Axis: 1181 Inch Per Minute |
Cutting Feed Rates: 590 Inch Per Minute |
Spindle Nose to Table (Min.- Max.): 5.91″ – 24.25″ |
Table: |
---|
Length: 36.20″ |
Width: 17.37″ |
Number of Std T-Slots: 4 |
T-Slot Width: 5/8″ |
Max Weight on Table: 1300 lbs |
Spindle: |
---|
Taper Size: 40 |
Speed Range: 8000 RPM |
Spindle Power: 20 HP |
Automatic Tool Changer: |
---|
Capacity: 30 |
Max Tool Weight: 17.6 lbs |
Max Tool Dia: 3.5″ |
Max Tool Length: 11.8″ |
Tool Changing Time: 1.3 Seconds |
General: |
---|
Air Required: 80 psi, 4 scfm |
Power: 220v / 30.9 kva / 3-Phase |
Overall Dimensions: 120″ x 100″ x 110″ High |
Weight: 11023 lbs |
SKU | 2453, 2454 |
---|