Vanguard S1-262A 36″ X 118″ 14.5″ Hollow Spindle Oil Country Lathe – Shenyang

Description

*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*

Specifications:

Vanguard S1-262A Equipped With:

31.5” Diameter 4 Jaw Chuck
14.5″ Hollow Spindle
4 Way tool post
Heavy Duty Steady Rest
Set of Steady Rests
Heavy Duty tailstock
Taper attachment

Vanguard S1-262A Specifications:
Capacity:
Max Turning Diameter: 28″ ?
Max Turning Length: 118″
Max Bar Capacity: 14.5″ 
Swing Over Bed: 36.0″
Swing Over Cross Slide: 32″ 
Distance Between Centers: 118″
Bed Width: 27.75″ 

Travel:
Cross Slide Travel: 12″ 
Longitudinal Travel: 118″
Compound Slide Travel: 8″
Compound Slide Swivel Angle: 90 Degrees
Cross Slide Width: 13″ 
Taper Attachment Taper Angle: 14 Degrees

Feed and Threads:
Threads Per Inch: (26) 1/2 to 28 TPI
Metric Threads: (22) 1 to 15 mm
Module Threads: (21) .5 to 7.5 
Diametral Threads: (20) 2 to 28 TPI
Longitudinal Feeds: (32) ,003 to .56 IPR 
Cross Feeds: (32) .003 to .56 IPR
Leadscrew Diameter-Pitch: 2.2″ – 2 TPI
Longitudinal Rapid Travers: 157 IPM
 
Spindle:
Spindle Nose: A1-20
Spindle Bore: 14.5″ 
Spindle Speed: 7 – 305 RPM 
Spindle Motor: 25 HP 
 
Tailstock:
Tailstock Body Travel: 100″ 
Tailstock Taper: MT-5
 
General:
Power Source: AC 440 V, Three Phase, 60 Hz 
Power Requirement: 36 kva
Overall Dimensions: 228″ x 72″ x 67″ 
Weight : 25,353 lbs Approx.
“No Charges for loading at list Price”