Okuma Multus U4000 Multi Axis CNC Turning Center

Okuma Multus U4000 Multi Axis CNC Turning Center


1 in stock

Used Okuma Multus U4000 Multi Axis CNC Turning Center for Sale.

SKU: 7011
Make: Okuma
Model No.: Multus U4000
Video: No Video

1 in stock


*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*

Model No.:Multus U4000
Year of Manufacture:2022
Cutting Time:6 Hours Only


Equipped With:
Okuma OSP-P300SA-H CNC Control
12,000 RPM Pendulum Milling Head
CAPTO C6 Spindle Taper
80 Position CAPTO C6 ATC Upgrade with Bar Feed Cover
Schunk THW3 – 315 Quick Jaw Change Chuck
Big Bore A2-11 Main Spindle with F2511 Cylinder + Drawtube
A2-8 Sub  Spindle with Schunk Chuck
LNS Steady Rest / Follow Rest Package
Programmable Steady Rest
Full C Axis on Spindles
Y Axis Capability
Collision Avoidance System (CAS)
Lathe Tool Index Function – Multi Edge (12 Position)
NC B-Axis with Contouring (Allows For Continuous 5-Axis Moves)
Renishaw RMP600 Probing System
Y Axis Gauging with Slope Gauging
Touch Setter
Right Discharge Drum Filter Chip Conveyor
Hydraulic Oil Temperature Regulator
Shower Coolant
8 Sets of Spare M-Codes
IGF Conversational
Royal Mist Collector Package FX-1200
MP Systems High Pressure Coolant Pump (1000 PSI)
PC Advance One Tough IGF Conversational Programming
Dual Chip Conveyor


Max Machining Diameter: 25.59″
Max Machining Length: 78.74″
Max Bar Capacity: 3.58″
Swing Over Saddle: 25.59″
Distance Between Spindles: 78.74″


X1 Axis Travel: 27.36″
Y Axis Travel: 11.81″ (+/- 5.91″)
Z1 Axis Travel: 82.68″
X2 Axis Travel: 9.25″
Z2 Axis Travel: 80.51″
W Axis Travel: 79.69″
B Axis Travel: 240 Degree (+210 /- 30 Degree) (0.001 Degree Controlled)
C Axis: 360 Degree (0.0001)
X Rapid Traverse Rate: 1968 Inch Per Minute
Y Rapid Traverse Rate: 1574 Inch Per Minute
Z Rapid Traverse Rate: 1968 Inch Per Minute


Main Spindle:
Spindle Nose: A2-11
Spindle Bore: 3.58″
Spindle Speed: 30 – 3000 RPM
Spindle Motor: 30 HP


Sub Spindle:
Spindle Nose: A2-8
Spindle Bore: 3.15″
Spindle Speed: 38 – 3800 RPM
Spindle Motor: 30 HP


Milling Head:
Single Station Pendulum Head with 80 ATC
Tool Type: CAPTO, C6 Taper
Spindle Speed: 50- 12,000 RPM
Spindle Motor: 25 HP


Lower Turret:
Capacity: 12 Station
Tool Shank: 1″ x 1″
ID Tool Shank Diameter.: 1.5″


Power Source: AC 220 V, Three Phase, 60 Hz
Power Requirement: 89.7 Kva
Overall Dimensions: 243.11″ x 121.34″ x 119.29″ High
Weight: 44,000 lbs Approx.


Go to Top