Used Okuma ES-L8 CNC Turning Center

Okuma ES-L8 CNC Turning Center

Make Okuma

Model No. ES-L8

Year 2000

Serial # C0071

Condition Very Good

Out of stock

“This machine is in very Good running condition. It is equipped with Collet Chuck, Tailstock & chip conveyor. On Our Floor fully powered / tested & is in Great working condition.”

Make	Okuma
Model No.	ES-L8
Year	2000
Serial #	C0071
Condition	Very Good

SKU: 1829

All specifications are approximations and are subject to verification.
“This machine is in very Good running condition. It is equipped with Collet Chuck, Tailstock & chip conveyor. On Our Floor fully powered / tested & is in Great working condition.”

Make	Okuma
Model No.	ES-L8
Year	2000
Serial #	C0071
Condition	Very Good

Okuma ES-L8 Equipped With:
8-Station Turret
OSP 700L CNC Control
One Touch IGF Programming
Floppy Drive
ATS Big Bore Collet Hydraulic Chuck ( 8″ Capable )
Hydraulic Tailstock with Power Quill
Chip Pan and Chip Conveyor
Coolant System
Automatic Lubrication system
Foot Operated Control for Chuck and Tailstock

Okuma ES-L8 Specifications:
Max Turning Diameter: 10.63″
Max Turning Length: 19.6″
Max Bar Capacity: 2.04″
Swing Over Slide: 13.78″
Swing Over Bed: 17.72″
Distance Between Centers: 24.6″

Travel:
X Axis Travel: 6.1″
Z Axis Travel: 20.47″
Rapid Traverse X Axis: 591 IPM
Rapid Traverse Z Axis: 787 IPM

Spindle:
Spindle Nose: A2-6
Spindle Bore: 2.44″
Spindle Speed: 5000 RPM
Spindle Motor: 15 HP

Turret:
Turret Capacity: 12 Stations
Turret Index Time: 0.5 Second

Tailstock:
Tailstock Body Travel: 14.3″
Tailstock Quill Dia.: 3.54″
Tailstock Quill Stroke: 3.93″
Tailstock Taper: MT-4

General:
Power Source: AC 220 V, Three Phase, 60 Hz
Power Requirement: 68 Amps
Overall Dimensions: 110″ x 68″ x 80″ High
Overall Dimensions: 140″ x 68″ x 80″ High with Chip Conveyor
Weight : 8500 lbs Approx.

Okuma ES-L8 comes as Shown in Pictures………….MachineStation is a global trading company located in California, USA. We specialize in the buying and selling of New & Used CNC Machines. Used Machine Dealer focused in All Kinds of CNC & Manual Metalworking machines.

As a used machine dealer, we have access to much more Used CNC Machines than we list here on our website. If you’re looking for a machine that you don’t see listed call us at 909-919-9600 or E-Mail Us and we can most likely locate one for you. The leading used machinery dealer.

Okuma ES-L8 Equipped With:
8-Station Turret
OSP 700L CNC Control
One Touch IGF Programming
Floppy Drive
ATS Big Bore Collet Hydraulic Chuck ( 203 mm Capable )
Hydraulic Tailstock with Power Quill
Chip Pan and Chip Conveyor
Coolant System
Automatic Lubrication system
Foot Operated Control for Chuck and Tailstock

Okuma ES-L8 Specifications:
Max Turning Diameter: 270 mm
Max Turning Length: 498 mm
Max Bar Capacity: 52 mm
Swing Over Slide: 350 mm
Swing Over Bed: 450 mm
Distance Between Centers: 625 mm

Travel:
X Axis Travel: 155 mm
Z Axis Travel: 520 mm
Rapid Traverse X Axis: 591 IPM
Rapid Traverse Z Axis: 787 IPM

Spindle:
Spindle Nose: A2-6
Spindle Bore: 62 mm
Spindle Speed: 5000 RPM
Spindle Motor: 15 HP

Turret:
Turret Capacity: 12 Stations
Turret Index Time: 0.5 Second

Tailstock:
Tailstock Body Travel: 363 mm
Tailstock Quill Dia.: 90 mm
Tailstock Quill Stroke: 100 mm
Tailstock Taper: MT-4

General:
Power Source: AC 220 V, Three Phase, 60 Hz
Power Requirement: 68 Amps
Overall Dimensions: 2,794 mm x 1,727 mm x 2,032 mm High
Overall Dimensions: 3,556 mm x 1,727 mm x 2,032 mm High with Chip Conveyor
Weight : 8500 lbs Approx.

Make	Okuma

Okuma-ES-L8-CNC-Turning-Center-for-Sale-in-MachineStation-California-8-1.jpg

Payment Terms

A booking deposit secures the machine, with the remaining balance due prior to loading or shipment. We accept bank transfer, wire transfer, and approved payment methods.