*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | ENSHU |
| Model: | GE580H |
| Year: | 2014 |
| Condition: | Used – Good |
| Machine Type: | CNC Horizontal Machining Center |
| Control: | Fanuc 31iMB CNC Control |
| Features: |
|---|
| Fanuc 31iMB CNC Control |
| Fanuc 54 HP Spindle Drive |
| Fanuc Axis Servo Drives |
| 40-Tool Automatic Tool Changer |
| Rotary Automatic Pallet Changer |
| Full 4th Axis — 360,000 Positions |
| BIG-PLUS CAT 50 Spindle |
| High-Pressure Through-Spindle Coolant — 256 PSI |
| Spindle Air Curtain |
| Spindle Oil Chiller |
| High-Volume Rolling Filter Chip Conveyor |
| Spindle Flood Coolant |
| Bed Flush Coolant |
| Ceiling Shower Coolant |
| Refrigerated & Temperature-Controlled Ballscrews |
| Ceramic Spindle Bearings |
| Oil-Air Lubrication |
| Rigid Tapping |
| LED Work Light |
| Three-Stage Stack Light |
| Door Interlock |
| Custom Macro B |
| High-Speed Skip |
| Capacity: |
|---|
| Pallet Size: 19.7″ × 19.7″ |
| Maximum Pallet Load: 1,763 lbs. |
| Total APC Capacity: 3,526 lbs. |
| Pallet Index Time — 90°: 2.0 sec. |
| Pallet Change Time: 10.0 sec. |
| Travels: |
|---|
| X-Axis Travel: 31.5″ |
| Y-Axis Travel: 31.5″ |
| Z-Axis Travel: 32.7″ |
| Feedrate: |
|---|
| Rapid Traverse X/Y/Z: 2,362 IPM |
| Cutting Feedrate: 0–1,968 IPM |
| X/Y/Z Feed Motors: 7.4 HP |
| Spindle: |
|---|
| Spindle Motor: 54 HP |
| Spindle Speed: 10,000 RPM |
| Spindle Taper: BIG-PLUS CAT 50 |
| Spindle Bearing Diameter: 4.33″ |
| Spindle Type: Integral |
| Full Power Range: 500–2,500 RPM |
| Spindle Ramp-Up Time: 3.8 sec. |
| Rigid Tapping Maximum Speed: 3,000 RPM |
| Coolant Through Spindle: 256 PSI |
| Automatic Tool Changer: |
|---|
| ATC Capacity: 40 Tools |
| Optional Magazine Capacity: 78 / 130 Tools |
| Maximum Tool Diameter: 4.7″ |
| Maximum Tool Diameter With Adjacent Pockets Empty: 9.4″ |
| Maximum Tool Length: 17.7″ |
| Maximum Tool Weight — Full Speed: 33 lbs. |
| Maximum Tool Weight — Reduced Speed: 55 lbs. |
| Tool-to-Tool Time: 2.1 sec. |
| General: |
|---|
| Power Source: 200/220V / 3 Phase / 60 Hz |
| Machine Dimensions (Approx.): 232″ L × 129″ W × 123″ H |
| Machine Weight (Approx.): 36,200 lbs. |
