*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Fryer |
| Model: | MC-30 |
| Year: | 2015 |
| Machine Type: | CNC Vertical Machining Center |
| CNC Control: | Fryer Touch 2200 |
| Features: |
|---|
| Fryer Touch 2200 CNC Control |
| Siemens-Powered CNC Control System |
| 24-Position Automatic Tool Changer |
| CAT 40 Spindle Taper |
| Through-Spindle Coolant |
| Chip Auger |
| Enclosed Work Area |
| Coolant Washdown |
| Air Gun |
| Dual Workholding |
| Table: |
|---|
| Table Size: 31.5″ × 16.5″ |
| Table Load Capacity: 2,500 lbs. |
| Number of T-Slots: 3 |
| T-Slot Width: 0.708″ |
| Table Height from Floor: 30″ |
| Spindle Center to Column: 18″ |
| Spindle Nose to Table – Maximum: 25″ |
| Spindle Nose to Table – Minimum: 3″ |
| Travels: |
|---|
| X-Axis Travel: 30″ |
| Y-Axis Travel: 18″ |
| Z-Axis Travel: 22″ |
| X-Axis Rapid Traverse: 1,200 IPM |
| Y-Axis Rapid Traverse: 1,200 IPM |
| Z-Axis Rapid Traverse: 900 IPM |
| Cutting Feedrate Range: 0.001–900 IPM |
| Spindle: |
|---|
| Spindle Taper: CAT 40 |
| Spindle Speed Range: 60–8,500 RPM |
| Optional Spindle Speeds: 12,000 RPM |
| Spindle Motor Power: 30 HP Peak |
| Optional Spindle Taper: CAT 50 |
| Through-Spindle Coolant |
| Automatic Tool Changer: |
|---|
| Tool Changer Capacity: 24 Stations |
| Tool Changer Type: Arm Type |
| Tool Change Time: 3 Seconds |
| Maximum Tool Diameter: 3.2″ |
| Maximum Tool Weight: 15.4 lbs. |
| Maximum Tool Length: 13″ |
| General: |
|---|
| Air Requirement: 90 PSI – 5 CFM |
| Power Source: 440v / 3-Phase / 60 Hz |
| Approximate Operating Dimensions: 93″ × 86″ × 89″ |
| Approximate Machine Weight: 9,900 lbs. |
