*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Kitamura |
| Model: | Mycenter HX250G |
| Year: | 2014 |
| Condition: | Used – Good |
| Features: |
|---|
| Arumatik-Mi CNC Control |
| 2-Station APC with High Speed 180° Rotary Table |
| 0.001° Full 4th Axis Table Indexing |
| 15,000 RPM High Speed Spindle |
| 40 Station Automatic Tool Changer |
| BT-30 Spindle Taper |
| Through Spindle Coolant |
| Fast Rapid Traverse Rate |
| MPG Handwheel Control |
| Pallet Seat Detection |
| Spindle Orientation |
| Rigid Tapping |
| PCMCIA Card Slot |
| Spindle Chiller |
| Automatic Lubrication System |
| Coolant System |
| Chip Conveyor |
| Travels: |
|---|
| X Axis: 12″ |
| Y Axis: 12″ |
| Z Axis: 13″ |
| B Axis: 0.001° ( Full 4th ) |
| Table Center to Spindle Nose (Min – Max): 2.36″ – 15.35″ |
| Rapid Traverse Rate: 2362 Inch Per Minute |
| Cutting Feedrate : 2362 Inch Per Minute |
| Table: |
|---|
| Length: 10″ |
| Width: 10″ |
| Max Weight on Table: 220 lbs |
| Max Workpiece Height: 15.75″ |
| Max Workpiece Diameter: 13.78″ |
| Automatic Pallet Change Time: 7.9 Seconds |
| Spindle: |
|---|
| Taper Size: BT-30 |
| Max. Speed: 15,000 RPM |
| Power: 15 HP |
| Tool changer: |
|---|
| Capacity: 40 Tools |
| Taper: BT-30 |
| Max Tool Diameter: 2.0″ |
| Max Tool Length: 7.87″ |
| Max Tool Weight: 4.40 lbs. |
| Tool Change Time: 0.9 Second |
| General: |
|---|
| Air Required: 80 psi, 4 scfm |
| Power: 30 kva / 200-220v / 3-Phase |
| Overall Dimensions: 115″ X 116″ x 89″ High Approx. |
| Weight: 11,814 lbs. Approx. |
