*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Hardinge Bridgeport |
| Model: | V480 APC |
| Machine Type: | CNC Vertical Machining Center |
| Configuration: | Automatic Pallet Changer (APC) |
| Features: |
|---|
- Automatic Pallet Changer (2-Position)
- Fully Enclosed Machining Area
- Sliding Front Safety Doors
- Compact High-Production Footprint
- FANUC CNC Control
- Ball Screw Drive System
- Grease-Lubricated Linear Guideways
|
| Travels: |
|---|
- X-Axis Travel: 18.9″
- Y-Axis Travel: 15.7″
- Z-Axis Travel: 16.9″
- Spindle Nose to Table: 8.9″ – 25.8″
|
| Table & Pallet: |
|---|
- Pallet Size: 23.6″ × 15.7″
- Max Load Per Pallet: 440 lbs
- Max Part Height: 15.7″
- Pallet Change Time: 8–10 Seconds
- Pallet Rotation: 180° CW / CCW
- Clamping Force: 4,850 lbs
|
| Spindle – Taper 40 (Belt Drive): |
|---|
- Spindle Taper: CAT / BT 40
- Spindle Speed: 10,000 RPM
- Spindle Motor: 10 HP
- Max Torque: 35.2 ft-lbs
- Max Tapping Speed: 3,000 RPM
|
| Spindle – Taper 30 (Direct Drive): |
|---|
- Spindle Taper: CAT / BT 30
- Spindle Speed: 15,000 RPM
- Spindle Motor: 7.5 HP
- Max Torque: 12.9 ft-lbs
- Max Tapping Speed: 6,000 RPM
|
| Feedrates: |
|---|
- Rapid Traverse (Taper 40): 1,417 IPM
- Rapid Traverse (Taper 30): 1,890 IPM
- Max Cutting Feed (Taper 40): 472 IPM
- Max Cutting Feed (Taper 30): 591 IPM
|
| Automatic Tool Changer: |
|---|
- Tool Changer Type: Swing Arm
- Tool Capacity: 20 Tools
- Tool Selection: Bi-Directional
- Max Tool Diameter: 3.0″ (Full) / 5.9″ (Adjacent Empty)
- Max Tool Length: 7.3″
- Max Tool Weight: 15.4 lbs (CAT40) / 8.8 lbs (CAT30)
- Tool Change Time: 2.5 sec (CAT40) / 0.8 sec (CAT30)
- Chip-to-Chip Time: 4.5 sec (CAT40) / 2.2 sec (CAT30)
|
| Coolant & Lubrication: |
|---|
- Coolant Tank Capacity: 31.7 Gallons
- Chip Flush Rate: 10.6 GPM
- Grease Lubrication for Spindle Bearings
- Grease Lubrication for Linear Guides & Ball Screws
|
| Electrical & Utilities: |
|---|
- Power Requirement: 220V / 3-Phase / 64A
- Air Requirement: 70 PSI Minimum
|
| Accuracy: |
|---|
- Positioning Accuracy: ±0.0004″
- Repeatability: ±0.0002″
|
