Sold
Hitachi Seiki HiCell CH 250 5Axis Turning Center
Out of stock
“This One Owner Machine is in Excellent Condition. X,Z,C,Y & B Axis 42 Tools W/Seicos 16T (Fanuc 16iT) Control 5 Axis Turn Mill Center is loaded with Features. On our Floor now, fully powered / tested & is in Great working condition. Check VIDEO. Contact us for more photos and video.”
| SKU: | 1375 |
| Make/Model: | Hitachi Seiki CH-250 |
Add to WishlistRemove from Wishlist
Add to Wishlist
Comes with All Original Manuals, Chucks, 20 Tool Holders, & Chip Conveyor.
All specifications are approximations and are subject to verification.
“This One Owner Machine is in Excellent Condition. X,Z,C,Y & B Axis 42 Tools W/Seicos 16T (Fanuc 16iT) Control 5 Axis Turn Mill Center is loaded with Features. On our Floor now, fully powered / tested & is in Great working condition. Contact us for more photos and video.”
| Make | Hitachi Seiki |
| Model No. | CH-250 |
| Year of Manufacture: | 2001 |
| Serial # | CH20170 |
| Condition | Very Good |
| Made in Japan |
| HITACHI SEIKI HICELL CH 250 Equipped With: |
|---|
| Seicos 16T (Fanuc 16iT) CNC Control |
| 10.4″ Color Display |
| 2 x 20 Station Tool Magazine |
| Rigid Tapping |
| Programmable Main & Sub Spindle with Full C Axis |
| Built in High Torque Motor on Headstock |
| 10″ MMK Hydraulic Main Chuck |
| 8″ MMK Hydraulic Sub Spindle Chuck |
| Parts Catcher |
| PCMCIA Card Slot |
| Hi Pressure Coolant System |
| Barfeed Interface |
| RS-232 ports |
| Chip Conveyor |
| Comes with All Original Manuals, 10″ & 8″ Chucks, 20 Tool Holders, & Chip Conveyor. |
| General: |
|---|
| Power: 36 kva, 220v / 3-Phase |
| Overall Dimensions: 130″ x 76″ x 90″ High |
| Overall Dimensions: 178″ x 76″ x 90″ High with Chip Conveyor on Right Side |
| Weight: 17600 lbs |
| HITACHI SEIKI HICELL CH 250 Specifications: |
|---|
| Capacity: |
| Max Turning Diameter: 19.68″ |
| Max Turning Diameter with Rotating Tool: 14.56″ |
| Max Turning Length: 28.34″ |
| Max Bar Capacity Main Spindle: 2.56″ |
| Max Bar Capacity Sub Spindle: 1.65″ |
| Swing Over Bed: 19.68″ |
| X Axis Travel: 23.62″ |
| Z Axis Travel: 39.37″ |
| Y Axis Travel: 5.90″ (+/-2.95″) |
| B Axis: 0.001° |
| C Axis Main & Sub Spindle: .001 |
| Rapid Traverse X & Z Axis: 1181 IPM |
| Rapid Traverse Y Axis: 590 IPM |
| Spindle Nose: A2-8 |
| Spindle Bore: 3.07″ |
| Spindle Speed: 0 – 4000 RPM |
| Spindle Motor: 25/20 HP |
| Sub Spindle Motor: 10/7.5 HP |
| Milling Spindle Speed: 80-8000 RPM |
| Milling Motor: 10/705 HP |
| Milling Spindle Taper: NT40 Short Taper |
| Tool Capacity: 42 (2 x 20 Stations ) |
| Max Tool Diameter: 4″ |
| Max Tool Length: 9.84″ |
| Max Tool Weight: 15lbs |
HITACHI SEIKI HICELL CH 250 Comes as shown in pictures.
New Arrivals
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
