Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
Equipment is sold AS-IS, WHERE-IS. All sales are final.
| Equipped With: |
|---|
| M730UM with CELOS – ERGOline Touch CNC Control |
| 10″ 3-Jaw Kitagawa BB210 Chuck on Main Spindle |
| 8″ 3-Jaw Kitagawa B208 Chuck on Sub Spindle |
| Sub Spindle |
| Sub Spindle Ejector |
| Servo Controlled C-Axis on Both Spindles |
| 12-Station Live Tool Turret – BMT |
| Y-Axis on Turret |
| Tool Presetter |
| Parts Catcher |
| High-Pressure Coolant |
| LNS Chip Blaster |
| Coolant Tank |
| Chip Conveyor |
| Books & Manuals |
| Foot Switch |
| Capacity: |
|---|
| Maximum Turning Diameter: 14.4″ |
| Maximum Turning Length: 27.7″ |
| Maximum Swing Over Bed: 36.2″ |
| Maximum Swing Over Cross Slide: 29.7″ |
| Maximum Bar Capacity: 3.1″ |
| Travels: |
|---|
| X-Axis Travel: 10.2″ |
| Y-Axis Travel: 3.90″ (±1.95″) |
| Z-Axis Travel: 31.2″ |
| B-Axis Travel (Sub Spindle): 28.8″ |
| C-Axis Indexing: 360° (0.001°) |
| Rapid Traverse Rate X, Z & B Axis: 1,181 IPM |
| Rapid Traverse Rate Y-Axis: 393 IPM |
| Main Spindle: |
|---|
| Spindle Nose: A2-8 |
| Spindle Bore: 3.58″ |
| Spindle Speed: 4,000 RPM |
| Spindle Motor: 25 HP |
| Sub Spindle: |
|---|
| Spindle Nose: A2-5 |
| Spindle Bore: 2.8″ |
| Spindle Speed: 6,000 RPM |
| Spindle Motor: 15 HP |
| Turret: |
|---|
| Turret Capacity: 12 Stations |
| Turret Index Time: 0.27 Second |
| Rotary Tool Speed: 10,000 RPM |
| Rotary Tool Motor: 7.5 HP |
| Tool Holder Type: BMT |
| General: |
|---|
| Power Source: AC 220V / 3-Phase / 60 Hz |
| Power Requirement: 50 kVA |
| Overall Dimensions: 156.7″ × 82.9″ × 86.6″ High |
| Weight: 13,992 lbs Approx. |
