*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.
| Make: | EMCO |
| Model: | Hyperturn 665 MC Plus |
| Year: | 2007 |
| Machine Type: | Multi-Axis CNC Turning Center |
| CNC Control: | GE Fanuc Series 18i-TB |
| Equipped With: |
|---|
| GE Fanuc Series 18i-TB CNC Control |
| Dual-Spindle Configuration |
| Main Spindle and Counter Spindle |
| B-Axis PowerMill Milling Spindle |
| 12-Position Bottom Tool Turret |
| 12 Driven Tool Positions |
| 48-Tool Magazine |
| CAPTO C4 Tool Holder System |
| C-Axis on Spindles |
| Automatic Tool Changer |
| Coolant System |
| Chip Conveyor |
| Fully Enclosed |
| Capacity: |
|---|
| Maximum Turning Diameter: 16.93″ |
| Maximum Part Length: 29.29″ |
| Maximum Bar Diameter: 2.56″ |
| Travels: |
|---|
| X-Axis Travel: 11.02″ |
| Z-Axis Travel: 35.43″ |
| Y-Axis Travel: 3.94″ |
| Main Spindle: |
|---|
| Spindle Speed Range: 5,000 RPM |
| Maximum Torque: 250 Nm |
| Spindle Connection: A2-6 |
| Spindle Diameter at Front Bearing: 4.13″ |
| Spindle Bore Without Tension Tube: 2.87″ |
| Spindle Power: 38.9 HP |
| Sub Spindle: |
|---|
| Spindle Speed Range: 7,000 RPM |
| Maximum Torque: 130 Nm |
| Spindle Connection: A2-6 |
| Spindle Diameter at Front Bearing: 2.87″ |
| Spindle Power: 29.5 HP |
| Turret: |
|---|
| Number of Tool Positions: 12 |
| Driven Tool Positions: 12 |
| Turret Indexing Time: 0.2 Seconds |
| Driven Tool Speed Range: 5,000 RPM |
| Drive Power: 9.0 HP |
| Rapid Traverse & Feed: |
|---|
| X / Z / Y / Z3 Rapid Traverse: 945 / 1,181 / 394 / 1,181 IPM |
| X-Axis Feed Force: 1,124 lbf |
| Z-Axis Feed Force: 1,798 lbf |
| Electrical: |
|---|
| Connected Load: 46 kVA |
| Electrical Supply: 3 × 400 V / PE |
| Frequency: 50 / 60 Hz |
| Compressed Air Connection: 87 PSI |
| General: |
|---|
| Machine Dimensions (W × D × H): 133.86″ × 100.39″ × 90.55″ |
| Approximate Machine Weight: 20,944 lbs |
