Used Mazak Integrex 300-IV Multi Axis CNC Turning Center

Mazak Integrex 300-IV Multi Axis CNC Turning Center

Location Lake Elsinore, CA

SKU 105478

Make & Model No. MAZAK INTEGREX 300-IV

Condition. Used-Good

Video On Request

Out of stock

Location:	Lake Elsinore, CA
SKU:	105478
Make & Model No.:	MAZAK INTEGREX 300-IV
Condition.:	Used-Good
Video:	On Request

SKU: 105478

*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*

Make:	MAZAK
Model No.:	INTEGREX 300-IV
Year of Manufacture:	11/2008
Cutting Hours:	Only

Equipped With:
Mazatrol Matrix CNC Control
12,000 RPM Pendulum Milling Head
40 Station Tool Magazine
Hydraulic Steady Rest
Full C-Axis on Spindle
Y Axis Capability
12″ Chuck on Spindle
USB LAN Options
EIA/ISO Programming
3DCoordinate Conversion
Rigid Tapping
PCMCIA Card Slot
Tool Presetter
High Pressure Coolant System
Foot Operated Control for Chuck
Chiller Unit
Chip Conveyor

Capacity:
Max Turning Diameter: 30″
Max Turning Length: 60″
Max Bar Capacity: 3.1″
Swing Over Bed: 30.0″
Distance Between Centers: 60″

Travel:
X Axis Travel: 24.80″
Y Axis Travel: 9.06″ (+/-4.53″)
Z Axis Travel: 62.40″
B Axis Travel: 225 Degree
C Axis: 360 Degree (0.001)
X Rapid Traverse Rate: 1496 Inch Per Minute
Y Rapid Traverse Rate: 1024 Inch Per Minute
Z Rapid Traverse Rate: 1496 Inch Per Minute

Spindle:
Spindle Nose: A2-8
Spindle Bore: 3.46″
Spindle Speed: 4000 RPM
Spindle Motor: 40 HP

Milling Head:
Single Station Pendulum Head with 40 ATC
Tool Type: KM-63, 40 Taper
Spindle Speed: 15-12,000 RPM
Spindle Motor: 25 HP
Spindle 90° Index Time: 0.5 sec

Tailstock:
Tailstock Body Travel: 60.83″
Tailstock Taper: MT-5
Tailstock Quill Dia.: 4.33″
Tailstock Quill Travel: 3.93″

General:
Power Source: AC 220 V, Three Phase, 60 Hz
Power Requirement: 56.5 Kva
Overall Dimensions: 193.4″ x 93.0″ x 110.2″ High
Weight: 25,740 lbs Approx.

“No Charges for loading at list Price”

Equipped With:
Mazatrol Matrix CNC Control
12,000 RPM Pendulum Milling Head
40 Station Tool Magazine
Hydraulic Steady Rest
Full C-Axis on Spindle
Y Axis Capability
305 mm Chuck on Spindle
USB LAN Options
EIA/ISO Programming
3DCoordinate Conversion
Rigid Tapping
PCMCIA Card Slot
Tool Presetter
High Pressure Coolant System
Foot Operated Control for Chuck
Chiller Unit
Chip Conveyor

Capacity:
Max Turning Diameter: 762 mm
Max Turning Length: 1,524 mm
Max Bar Capacity: 79 mm
Swing Over Bed: 762 mm
Distance Between Centers: 1,524 mm

Travel:
X Axis Travel: 630 mm
Y Axis Travel: 230 mm (+/-115 mm)
Z Axis Travel: 1,585 mm
B Axis Travel: 225 Degree
C Axis: 360 Degree (0.001)
X Rapid Traverse Rate: 1496 Inch Per Minute
Y Rapid Traverse Rate: 1024 Inch Per Minute
Z Rapid Traverse Rate: 1496 Inch Per Minute

Spindle:
Spindle Nose: A2-8
Spindle Bore: 88 mm
Spindle Speed: 4000 RPM
Spindle Motor: 40 HP

Milling Head:
Single Station Pendulum Head with 40 ATC
Tool Type: KM-63, 40 Taper
Spindle Speed: 15-12,000 RPM
Spindle Motor: 25 HP
Spindle 90° Index Time: 0.5 sec

Tailstock:
Tailstock Body Travel: 1,545 mm
Tailstock Taper: MT-5
Tailstock Quill Dia.: 110 mm
Tailstock Quill Travel: 100 mm

General:
Power Source: AC 220 V, Three Phase, 60 Hz
Power Requirement: 56.5 Kva
Overall Dimensions: 4,912 mm x 2,362 mm x 2,799 mm High
Weight: 25,740 lbs Approx.

Model	INTEGREX 300-IV
Make	Mazak

Payment Terms

A booking deposit secures the machine, with the remaining balance due prior to loading or shipment. We accept bank transfer, wire transfer, and approved payment methods.