Sold
Haas VF-6/50 CNC Vertical Machining Center – 4th Axis Ready 50 Taper Mill
Location
Van Nuys, CA
SKU
112430
Make
HAAS
Model
VF-6/50
Year
2012
Condition
Used - Good
Out of stock
| Location: | Van Nuys, CA |
| SKU: | 112430 |
| Make: | HAAS |
| Model: | VF-6/50 |
| Year: | 2012 |
| Condition: | Used – Good |
Add to WishlistRemove from Wishlist
Add to Wishlist
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | HAAS |
| Model: | VF-6/50 |
| Year: | 2012 |
| Features: |
|---|
| Haas CNC Control |
| 4th Axis Drive and Wiring (Upgraded $3,595 value Included) |
| 7500 RPM High Torque Spindle |
| 30 HP 2 Speed Gear Drive |
| Through Spindle Coolant (Upgraded $7,095 value Included) |
| 30 Station Automatic Tool Changer |
| MPG Handwheel Control |
| Rigid Tapping |
| Programmable Coolant Nozzle |
| Auxiliary Coolant Filter System (Upgraded $3,195 value Included) |
| Advance Tool Management |
| Enable Extended Memory |
| Floopy Enable |
| Hard Drive Enable |
| Coolant System |
| Levelling Pads |
| Quad-Auger System with Conveyor (Upgraded $23,695 value Included) |
| Travels: |
|---|
| X-Axis: 64″ |
| Y-Axis: 32″ |
| Z-Axis: 30″ |
| Rapid Traverse Rates: 600 Inch Per Minute |
| Cutting Feed Rates: 500 Inch Per Minute |
| Spindle Nose to Table (Min.- Max.): 5″ – 35″ |
| Table: |
|---|
| Length: 64″ |
| Width: 28″ |
| Number of Std T-Slots: 5 |
| T-Slot Width: 5/8″ |
| Max Weight on Table: 4000 lbs |
| Spindle: |
|---|
| Taper Size: CAT-50 |
| Speed Range: 7500 RPM |
| Spindle Power: 30 HP |
| Vector Drive Max Torque: 340 ft-lb @ 700 RPM |
| Automatic Tool Changer: |
|---|
| Capacity: 30 Station Side Mounted |
| Max Tool Weight: 30 lbs |
| Max Tool Diameter (Full): 4″ |
| Max Tool Diameter (adjacent empty): 10″ |
| Max Tool Length: 16″ |
| Tool Changing Time: 4.2 Seconds |
| General: |
|---|
| Air Required: 100 psi, 4 scfm |
| Power: 220v / 66FLA / 3-Phase |
| Overall Dimensions: 195″ x 102″ x 132″ High Approx. |
| Weight: 25,500 lbs Approx. |
| Travels: |
|---|
| X-Axis: 1,626 mm |
| Y-Axis: 813 mm |
| Z-Axis: 762 mm |
| Rapid Traverse Rates: 600 Inch Per Minute |
| Cutting Feed Rates: 500 Inch Per Minute |
| Spindle Nose to Table (Min.- Max.): 127 mm - 889 mm |
| Table: |
|---|
| Length: 1,626 mm |
| Width: 711 mm |
| Number of Std T-Slots: 5 |
| T-Slot Width: 5/203 mm |
| Max Weight on Table: 4000 lbs |
| Spindle: |
|---|
| Taper Size: CAT-50 |
| Speed Range: 7500 RPM |
| Spindle Power: 30 HP |
| Vector Drive Max Torque: 340 ft-lb @ 700 RPM |
| Automatic Tool Changer: |
|---|
| Capacity: 30 Station Side Mounted |
| Max Tool Weight: 30 lbs |
| Max Tool Diameter (Full): 102 mm |
| Max Tool Diameter (adjacent empty): 254 mm |
| Max Tool Length: 406 mm |
| Tool Changing Time: 4.2 Seconds |
| General: |
|---|
| Air Required: 100 psi, 4 scfm |
| Power: 220v / 66FLA / 3-Phase |
| Overall Dimensions: 4,953 mm x 2,591 mm x 3,353 mm High Approx. |
| Weight: 25,500 lbs Approx. |
| Make | Haas |
|---|---|
| Model | VF-6/50 |
| Categories | CNC Vertical Machining Centers |
- Haas CNC Control
- 4th Axis Drive and Wiring (Upgraded $3,595 value Included)
- 7500 RPM High Torque Spindle
- 30 HP 2 Speed Gear Drive
- Through Spindle Coolant (Upgraded $7,095 value Included)
- 30 Station Automatic Tool Changer
- MPG Handwheel Control
- Rigid Tapping
- Programmable Coolant Nozzle
- Auxiliary Coolant Filter System (Upgraded $3,195 value Included)
- Advance Tool Management
- Enable Extended Memory
- Floopy Enable
- Hard Drive Enable
- Coolant System
- Levelling Pads
- Quad-Auger System with Conveyor (Upgraded $23,695 value Included)
Payment Terms
A booking deposit secures the machine, with the remaining balance due prior to loading or shipment. We accept bank transfer, wire transfer, and approved payment methods.
Shipping & Logistics
We coordinate domestic and international shipping, including loading, containerization, and freight arrangements through trusted logistics partners.
Machine Inspection
Buyers can request a live video demonstration, machine inspection, or schedule an on-site visit before completing the purchase.
Export & Documentation
For international orders, we can assist with export documentation, commercial paperwork, and pre-shipment inspection requirements.
Related Products
New Arrival
New Arrival
New Arrival
You Might Like
New Arrival
New Arrival
New Arrival
New Arrival
