Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
| Make: | Okuma |
| Model: | MB-56VA |
| Year: | 2005 |
| Features: |
|---|
| Okuma OSP-P100 CNC Control |
| 8,000 RPM High-Speed Spindle |
| Through Spindle Coolant |
| 32-Station Automatic Tool Changer |
| CAT-40 Taper Spindle |
| Spindle Chiller Unit |
| MPG Handwheel Control |
| Coolant Tank |
| Chip Conveyor |
| Travels: |
|---|
| X-Axis Travel: 41.34″ |
| Y-Axis Travel: 22.05″ |
| Z-Axis Travel: 18.11″ |
| X & Y Axis Rapid Traverse Rates: 1,575 IPM |
| Z-Axis Rapid Traverse Rate: 1,260 IPM |
| Cutting Feed Rate: 1,260 IPM |
| Spindle Nose to Table (Min.-Max.): 5.91″ – 24.02″ |
| Table: |
|---|
| Length: 51.18″ |
| Width: 22.05″ |
| Maximum Weight on Table: 1,980 lbs |
| Spindle: |
|---|
| Taper Size: CAT-40 |
| Speed Range: 8,000 RPM |
| Spindle Power: 30 HP |
| Automatic Tool Changer: |
|---|
| Capacity: 32-Station Side Mounted |
| Maximum Tool Weight: 18 lbs |
| Maximum Tool Length: 11.81″ |
| Maximum Tool Diameter: 3.54″ |
| General: |
|---|
| Air Required: 90 psi, 4 scfm |
| Power: 220V / 480V / 37 kVA / 3-Phase |
| Overall Dimensions: 100″ × 123″ × 108″ High Approx. |
| Weight: 18,260 lbs Approx. |
