USED HARDINGE BRIDGEPORT DT480 P3 Vertical Machining

Hardinge Bridgeport DT480 P3 VMC

SKU 1272

Make/Model Hardinge Bridgeport TDT-480 P3

Out of stock

SKU:	1272
Make/Model:	Hardinge Bridgeport TDT-480 P3

SKU: 1272

*All specifications are approximations and are subject to verification.

“This One Owner Machine has only 1524 Cutting Hours, 10000rpm, 20 tool side mount High speed tool changer, expanded Memory and many more features. On our Floor now, fully powered / tested & is in Great working condition. check *VIDEO”

Make	Hardinge Bridgeport
Model No.	TDT-480 P3
Year of Manufacture:	2008
Serial #	NVJA6K0051
Condition	Very Good

HARDINGE BRIDGEPORT DT480 Features:
Fanuc 0i-MC CNC Control
High Speed Arm Type Tool Changer (Optional)
High precision 10,000 RPM Spindle
PCMCIA Card Slot
Royal Filtermist System
Powerful 7.5 hp high torque spindle motor
Spindle Orientation
Rigid Tapping
Custom Micro B (User Definable)
Fast 1890 IPM Rapid Traverse Rate
Flood coolant with large separate coolant tank
Work light

HARDINGE BRIDGEPORT DT480 Specifications:
Travels:
X-Axis: 18.90″
Y-Axis: 15.75″
Z-Axis: 16.93″
Spindle Nose to Table (Min.- Max.): 5.9″ – 18.9″
Spindle Center to Column: 20.5″

Table:
Length: 23.6″
Width: 15.8″
Max Weight on Table: 661 lbs

Spindle:
Taper Size: BT 30
Speed Range: 60 – 10,000 RPM
Spindle Power: 7.5 HP

Feed rates:
Rapid X,Y & Z: 1890 inch/P.M
Cutting Feedrate: 591″ inch/ P.M

Automatic Tool Changer:
30 Taper
Capacity: 20
Max Tool Weight: 15.4 lbs
Max Tool Length: 7.48″
Max Tool Dia.: 5.90″
Tool Change Time: 0.8 second

General:
Air Required: 80 psi, 4 scfm
Power: 205-220v / 66FLA / 3-Phase
Overall Dimensions: 62″ x 84″ x 82″ High
Weight: 6200 lbs

HARDINGE BRIDGEPORT DT480 Comes as shown in pictures.

HARDINGE BRIDGEPORT DT480 Features:
Fanuc 0i-MC CNC Control
High Speed Arm Type Tool Changer (Optional)
High precision 10,000 RPM Spindle
PCMCIA Card Slot
Royal Filtermist System
Powerful 7.5 hp high torque spindle motor
Spindle Orientation
Rigid Tapping
Custom Micro B (User Definable)
Fast 1890 IPM Rapid Traverse Rate
Flood coolant with large separate coolant tank
Work light

HARDINGE BRIDGEPORT DT480 Specifications:
Travels:
X-Axis: 480 mm
Y-Axis: 400 mm
Z-Axis: 430 mm
Spindle Nose to Table (Min.- Max.): 150 mm – 480 mm
Spindle Center to Column: 521 mm

Table:
Length: 599 mm
Width: 401 mm
Max Weight on Table: 661 lbs

Spindle:
Taper Size: BT 30
Speed Range: 60 – 10,000 RPM
Spindle Power: 7.5 HP

Feed rates:
Rapid X,Y & Z: 1890 inch/P.M
Cutting Feedrate: 15,011 mm inch/ P.M

Automatic Tool Changer:
30 Taper
Capacity: 20
Max Tool Weight: 15.4 lbs
Max Tool Length: 190 mm
Max Tool Dia.: 150 mm
Tool Change Time: 0.8 second

General:
Air Required: 80 psi, 4 scfm
Power: 205-220v / 66FLA / 3-Phase
Overall Dimensions: 1,575 mm x 2,134 mm x 2,083 mm High
Weight: 6200 lbs

Make	Hardinge

Payment Terms

A booking deposit secures the machine, with the remaining balance due prior to loading or shipment. We accept bank transfer, wire transfer, and approved payment methods.