*All specifications are approximations and are subject to verification.
Check VIDEO.
| Make |
HARDINGE |
| Model No. |
Talent 8/52 |
| Year of Manufacture: |
2004 |
| Serial # |
BLB 244 |
| Condition |
Very Good |
| Mfg. No.: |
BLBA4D 0040 |
| Comes with All Manuals |
|
| HARDINGE TALENT 8 52 Features: |
| Fanuc 32 bit Oi-tb CNC Control |
| 8.4″ Color LCD Display |
| Flash Card Slot (upto 64 MB) |
| 8.25″ 3 Jaw Hydraulic Chuck |
| Hydraulic Tailstock |
| Barfeed Interface |
| Parts Catcher |
| RS-232 port |
| 12 Station Automatic Turret |
| Chip Conveyor |
| Coolant Tank |
| HARDINGE TALENT 8 52 Specifications: |
| Capacity: |
| MAXIMUM TURNING DIAMETER: 11.10″ |
| MAXIMUM TURNING LENGTH: 15″ |
| SWING OVER CROSS SLIDE: 18″ |
| MAXIMUM BAR TUBE CAPACITY: 2.05″ |
| Travels: |
| X AXIS TRAVEL 9.0″ |
| Z AXIS TRAVEL 16.00″ |
| RAPID TRAVERSE RATE X AXIS 1181 IPM |
| RAPID TRAVERSE RATE Z AXIS 1181 IPM |
| Spindle: |
| SPINDLE NOSE: A2-6 |
| SPINDLE SPEEDS: 0 – 5,000 RPM |
| SPINDLE MOTOR: 15 HP / 11kw |
| Turret: |
| TURRET Type: VDI 30 |
| CAPACITY: 12 STATIONS |
| TURRET INDEX (Single Step): 0.78 Second |
| Tool Size Max Square/ Round Max: 3/4″ / 1-1/4″ |
| TailStock: |
| QUILL TAPER: MT #4 |
| Base Travel: 13.42″ |
| QUILL TRAVEL: 2.0″ |
| TAILSTOCK QUILL THRUST: 225 – 900 LB |
| General: |
| Power: 220v / 3-Phase |
| Overall Dimensions: 80″ x 65″ x 70″ High ( with Chip Conveyor) |
| Overall Dimensions: 120″ x 65″ x 70″ High ( without Chip Conveyor) |
| Weight: 6200 lbs |
HARDINGE TALENT 8 52 Comes as shown in pictures.
