*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | HARDINGE |
| Model: | HLV-H |
| Machine Type: | Super Precision Toolroom Lathe |
| Equipped With: |
|---|
| Hardinge HLV-H Super Precision Toolroom Lathe |
| Acu-Rite III Digital Readout |
| 2-Axis Digital Readout — DRO Axes Visible on Acu-Rite III Unit |
| Variable-Speed Spindle Drive |
| Hardinge Precision Spindle |
| Hardinge Tapered Spindle Nose |
| 5C Collet Capacity |
| Quick-Change / Precision Tool Post |
| Manual Cross Slide |
| Compound Slide |
| Power Longitudinal Feed |
| Power Cross Feed |
| Tailstock |
| No. 2 Morse Taper Tailstock |
| Built-In Coolant System |
| Work Light |
| Machine Cabinet / Stand |
| Capacity: |
|---|
| Swing Over Bed: 11″ |
| Swing Over Carriage: 9″ |
| Swing Over Cross Slide: 6″ |
| Distance Between Centers: 18″ |
| Compound Slide Travel: 3″ |
| Spindle: |
|---|
| Spindle Nose: Hardinge Tapered Nose |
| Spindle Bore: 1.25″ |
| Spindle Speed Range: 125–3,000 RPM |
| Spindle Drive: Variable Speed |
| 5C Round Collet Capacity: 1.06″ |
| 5C Hex Collet Capacity: 0.875″ |
| 5C Square Collet Capacity: 0.75″ |
| Step Chuck Capacity: 1″–6″ |
| Jaw Chuck Capacity: Up to 5″ |
| Feedrates: |
|---|
| Carriage Power Feed Range: 5/16–7 IPM |
| Cross Slide Power Feed Range: 3/16–4 IPM |
| Threading: |
|---|
| Threading System: Quick-Change Gearbox |
| Threading Type: Inch Threading |
| Thread Range: 11–108 TPI |
| Number of Thread Changes: 27 |
| Lead Screw: 1″–8 TPI |
| Tailstock: |
|---|
| Tailstock Type: Manual |
| Tailstock Taper: 2 Morse Taper |
| Tailstock Spindle Diameter: 1.375″ |
| Tailstock Spindle Travel: 3.75″ |
| General: |
|---|
| Power Source: 460V / 3-Phase / 60 Hz |
| Overall Dimensions (Approx.): 69″ L × 36″ W × 58″ H |
| Machine Weight (Approx.): 2,200 lbs. |
