Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.Equipment is sold AS-IS, WHERE-IS. All sales are final.
| Features: |
|---|
| Mitsubishi M720 CNC Control |
| Linear Ways Construction |
| 20,000 RPM High-Speed Spindle |
| HSK-63 Spindle Taper |
| 24-Station Automatic Tool Changer |
| MPG Handwheel Control |
| Coolant Tank |
| Table: |
|---|
| Length: 39.37″ |
| Width: 22.05″ |
| Number of T-Slots: 5 |
| T-Slot Size: 0.71″ |
| Maximum Weight on Table: 1,653 lbs |
| Travel: |
|---|
| X-Axis Travel: 40.16″ |
| Y-Axis Travel: 22.05″ |
| Z-Axis Travel: 23.62″ |
| Rapid Traverse Rates X & Y Axis: 1,417 IPM |
| Rapid Traverse Rate Z Axis: 945 IPM |
| Cutting Feed Rates: 787 IPM |
| Spindle Nose to Table (Min.-Max.): 5.31″ – 28.94″ |
| Automatic Tool Changer: |
|---|
| Capacity: 24 Stations |
| Maximum Tool Diameter: 3.15″ |
| Maximum Tool Diameter (Adjacent Empty): 4.92″ |
| Maximum Tool Length: 11.81″ |
| Maximum Tool Weight: 17.64 lbs |
| Spindle: |
|---|
| Taper Size: HSK-63 |
| Speed Range: 20,000 RPM |
| Spindle Power: 24.8 HP |
| General: |
|---|
| Air Required: 85 PSI |
| Power: 220V / 60 Hz / 3-Phase / 25 kVA |
| Machine Dimensions: 88.19″ × 107.68″ × 102.64″ High Approx. |
| Weight: 16,314 lbs |
