2022 DOOSAN PUMA VTR1216M ram-type CNC vertical boring mill with 66.9″ swing, Fanuc control, C-axis and live milling, 55″ 4-jaw chuck, 15-station tool changer, Renishaw probing, and dual chip conveyors. Used; listed at 1,022 cutting hours.
Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
Equipment is sold AS-IS, WHERE-IS. All sales are final.
| Make: | Doosan |
| Model: | PUMA VTR1216M |
| Year: | 2022 |
| Features: |
|---|
| Fanuc CNC Control |
| C-Axis & Live Milling Capability |
| Heavy-Duty Ram-Type Vertical Turning Construction |
| Rigid Tapping |
| Automatic Lubrication System |
| Coolant Tank |
| Low Hours (1,022 Cutting Hours / 1,019 Run Hours / 4,608 Power-On Hours) |
| 55 inch 4-Jaw Independent Chuck (CAS-55, 4 Jaws Included) |
| Chuck Open / Close & Clamp / Unclamp Confirmation Proximity Switches |
| Dual Chuck Pressure System & Hydraulic Actuator |
| 15-Position Automatic Tool Changer |
| Full Splash Guard Enclosure w/ Sliding Operator Doors |
| Renishaw Probing System (RMP600-1IN-DIA Part Probe w/ 1 inch Shank & 3.9 inch Stylus + RMI-Q Radio Frequency Interface Receiver Included) |
| Automatic Tool Gauge |
| 725 PSI Hydraulic System |
| Dual Chip Conveyors (2) |
| Operator Platform Steps w/ Safety Handrail |
| Complete Tool Holder Set |
| Operation and Maintenance Manuals |
| Leveling Pads |
| Capacity: |
|---|
| Maximum Machining Diameter: 63 inch |
| Maximum Machining Height: 49 inch |
| Maximum Swing Diameter: 66.9 inch |
| Maximum Workpiece Weight: 17,636.7 lbs |
| Travels: |
|---|
| X-Axis Travel: 67 inch |
| Z-Axis Travel: 47 inch |
| C-Axis: 360° (0.001°) |
| Rapid Traverse X: 472 IPM |
| Rapid Traverse Z: 394 IPM |
| Cutting Feedrate: 0.04 – 196.9 IPM |
| Table: |
|---|
| Chuck Diameter: 55 inch |
| Max Torque: 15,162 ft-lb |
| Max Weight on Table: 17,636.7 lbs |
| Spindle: |
|---|
| Spindle Speed: 400 RPM |
| Spindle Motor: 60 HP |
| Spindle Type: Ram-Type Vertical Turning Spindle |
| Automatic Tool Changer: |
|---|
| Capacity: 15 Stations |
| Rotary Tool Speed: 3,000 RPM |
| General: |
|---|
| Power: AC 220V / 3-Phase / 50-60 Hz |
| Overall Dimensions: Floor Dimensions: L 193 inch x W 162 inch x H 186 inch Approx. |
| Weight: 66,138.67 lbs Approx. |






























