*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Mazak |
| Model: | Integrex 300II-SY |
| Year: | 2002 |
| Condition: | Used – Good |
| Equipped With: |
|---|
| Mazatrol Fusion 640MT CNC Control |
| Rigid Tapping |
| PCMCIA Card Slot |
| Coolant System |
| 10,000 RPM Pendulum Milling Head |
| 40 Station Tool Magazine |
| Sub Spindle |
| Full C-Axis on Both Spindles |
| Y Axis Capability |
| 12″ 3-Jaw Chuck on Main Spindle |
| 10″ 3-Jaw Chuck on Sub Spindle |
| Tool Presetter |
| Part Cather |
| Foot Operated Control for Chuck |
| Chip Conveyor |
| Transformer |
| Capacity: |
|---|
| Max Turning Diameter: 30″ |
| Max Turning Length: 60″ |
| Max Bar Capacity: 3.1″ |
| Travels: |
|---|
| X Axis Travel: 10.51″ |
| Y Axis Travel: -1.97″ ～ +2.76″ |
| Z Axis Travel: 33.07″ |
| A Axis Travel (Sub Spindle): 30.71″ |
| C Axis Indexing: 360 Degree (0.001) |
| Rapid Traverse Rate X, Z & A Axis: 1181 IPM |
| Rapid Traverse Rate Y Axis: 393 IPM |
| Main Spindle: |
|---|
| Main Spindle Nose: A2-8 |
| Main Spindle Bore: 3.70″ |
| Main Spindle Speed: 4200 RPM |
| Man Spindle Motor: 30 HP |
| Sub Spindle: |
|---|
| Sub Spindle Nose: F140 |
| Sub Spindle Bore: 2.09″ |
| Sub Spindle Speed: 6000 RPM |
| Sub Spindle Motor: 15 HP |
| Turret: |
|---|
| Turret Capacity: 12 Stations |
| Rotary Tool Speed: 6,000 RPM |
| Rotary Tool Motor: 10 HP |
| Tool Holders Type: All Type |
| General: |
|---|
| Power Source: AC 220 V Three Phase 50/60 Hz |
| Power Requirement: 33 kva |
| Overall Dimensions: 118″ x 85″ x 90″ High Approx. |
| Weight : 14,740 lbs Approx. |
