Avoid Paying More! New Haas prices just went up 5% as of May 1st 2025 — plus, long lead times on new machines mean delays and higher costs. This 2018 Haas DM-2 is fully equipped with 15,000 RPM Spindle, 4th Axis Drive and Wiring, Haas 4th Axis Indexer with Tailstock, HSM and Chip Auger.
“Replacement Cost Over $107,000 with Similar Options”
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: |
HAAS |
| Model: |
DM2 |
| Year: |
2018 |
| Condition: |
Used – Excellent |
| Features: |
| Haas CNC Control |
| 4th Axis Wiring and Drive (Upgraded $3,595 value Included) |
| Haas 4th Axis Indexer with Tailstock (Upgraded $13,895 value Included) |
| 15,000 RPM Spindle (Upgraded $14,695 value Included) |
| High Speed Machining (Upgraded $3,995 value Included) |
| CAT-40 Taper Spindle |
| 18 Station Automatic Tool Changer |
| Rigid Tapping |
| Media Display |
| Compensation Tables |
| 1GB Memory |
| Coolant System |
| Chip Auger (Upgraded $4,095 value Included) |
| Travel: |
| X-Axis: 28.0″ |
| Y-Axis: 16.0″ |
| Z-Axis: 15.5″ |
| Rapid Traverse Rates: 2400 Inch Per Minute |
| Cutting Feed Rates: 1200 Inch Per Minute |
| Spindle Nose to Table (Min.- Max.): 6″ – 21.5″ |
| Table: |
| Length: 34.0″ |
| Width: 15.0″ |
| Number of Std T-Slots: 3 |
| T-Slot Width: 5/8″ |
| Max Weight on Table: 500 lbs |
| Spindle: |
| Taper Size: CAT-40 |
| Speed Range: 15,000 RPM |
| Spindle Power: 15 HP |
| Automatic Tool Changer: |
| Capacity: 18 Stations Side Mounted |
| Max Tool Weight: 12 lbs |
| Max Tool Dia: 2.5″ |
| Max Tool Length: 7.0″ |
| Tool Changing Time: 1.75 Seconds |
| General: |
| Air Required: 100 psi 4 scfm |
| Power: 220v / 66FLA / 3-Phase |
| Overall Dimensions: 91″ x 100″ x 98″ High |
| Weight: 5,350 lbs |
