All specifications are approximations and are subject to verification.
| Make | AWEA |
| Model No. | VP-2012 |
| Year | 2000 Installed 2004 |
| Serial # | 0126 |
| Condition | Very Good |
-
Awea VP-2012 CNC Vertical Bridge Mill Equipped With:
- Fanuc 18M CNC Control
- 401L 16″ Rotary Table w/ Tailstock
- 80″ X 44″ Jig Table
- 30 Station Side Mount Tool Changer
- 50 Taper Geared Head
- 5000 RPM Spindle
- Powerful 35 HP high torque spindle motor
- RS-232 Port
- Spindle Orientation
- Box Way Construction
- Portable manual pulse generator
- Flood coolant with large separate coolant tank Base
- Flush Chip Disposal with Dual Auger
- Chip Conveyor
- Spindle Chiller Unit
- Foot Switch
- Levelling Pads
-
Awea VP-2012 CNC Vertical Bridge Mill Specifications:
- Travels:
- X-Axis: 78.0″
- Y-Axis: 47.6″
- Z-Axis: 30.9″
- Distance Between Columns: 51.5″
- Spindle Nose to Table (Min.- Max.): ″
- Table: Length: 78.6″
- Width: 43.4″
- T-Slot: 0.87″ Wide X 20 X 7.87″
- Max Weight on Table: 33,000 lbs
-
Spindle:
- Taper Size: 50
- Speed Range: 5000 RPM
- Spindle Power: 35 HP
- Feed rates: Rapid X,Y & Z: 590 inch per minute
- Cutting Feedrate: .04″ – 376″ inch per minute
-
Automatic Arm Type Tool Changer:
- 50 Taper
- Capacity: 30
- Max Tool Weight: 43 lbs
- Max Tool Length: 13.77″
- Max Tool Dia.: 5.2 – 7.7″
-
General:
- Air Required: 100 psi, 4 scfm
- Power: 220v / 3-Phase, 65 Kva
- Floor Dimensions: 18’6″ X 10′ x 10’9″ High
- Hydraulic Unit, Chip Conveyor extra
- Weight: 40,600 lbs
MachineStation buys sells trade all kinds of new and used CNC metal cutting & metal forming machines …. Used CNC Machines, CNC lathes, CNC mills, presses, gears, turning centers, horizontal machining centers, vertical machining centers, horizontal lathes, vertical lathes, surface grinders, cylindrical grinders, sheets, fabricating equipment, boring mills, lasers cutting, saws, waterjets, shears, press brakes.
