Sold
Johnford HT-100E-2D CNC Oil Country Lathe
Location
Houston, TX
SKU
111861
Make/Model
JOHNFORD HT-100E-2D
Video
No Video
Out of stock
| Location | Houston, TX |
| SKU: | 111861 |
| Make/Model: | JOHNFORD HT-100E-2D |
| Video: | No Video |
Add to WishlistRemove from Wishlist
Add to Wishlist
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | JOHNFORD |
| Model: | HT100E2D |
| Year: | 2007 |
| Condition: | Used – Good |
| Equipped With: |
|---|
| Fanuc 18iT CNC Control |
| Boring Bar Slide ( W Axis ) |
| SMW Hydraulic Steady Rest |
| A2-15 Spindle with 10″ Bore |
| Schunk Rota TB-500 24″ 3 Jaw Chuck with 10″ Bore |
| 60 HP Gearbox Spindle |
| PCMCIA Card Slot |
| Programmable Tailstock |
| Rigid Tapping |
| Coolant System |
| Foot Switch |
| Chip Conveyor |
| Capacity: |
|---|
| Max Turning Diameter: 36.6″ |
| Max Turning Length: 100.4″ |
| Max Bar Capacity: 9.3″ |
| Swing Over Bed: 27.2″ |
| Swing Over Cross slide: 23.6″ |
| Distance Between Centers: 98.46″ |
| Travels: |
|---|
| X Axis Travel : 12.6″ |
| Z Axis Travel: 98.4″ |
| W Axis Travel: 89.0″ ? |
| Rapid Traverse X Axis: 630 IPM |
| Rapid Traverse Z Axis: 630 IPM |
| Spindle: |
|---|
| Spindle Nose: A2-15 |
| Spindle Bore: 10.8″ |
| Spindle Speed: 10 – 750 RPM |
| Spindle Motor: 60 HP |
| Turret: |
|---|
| Turret Capacity: 12 Stations |
| Turret Index Time: 0.4 Second |
| Tailstock: |
|---|
| Tailstock Body Travel: 86.7″ |
| Tailstock Taper: MT-4 |
| Tailstock Quill Dia.: 7.9″ |
| Tailstock Quill Travel: 7.9″ |
| General: |
|---|
| Power Source: AC 220v / 3-Phase / 60 Hz |
| Machine Dimensions: 275″ x 114″ x 115″ High |
| Machine Weight: 50,000 lbs Approx. |
| Equipped With: |
|---|
| Fanuc 18iT CNC Control |
| Boring Bar Slide ( W Axis ) |
| SMW Hydraulic Steady Rest |
| A2-15 Spindle with 254 mm Bore |
| Schunk Rota TB-500 610 mm 3 Jaw Chuck with 254 mm Bore |
| 60 HP Gearbox Spindle |
| PCMCIA Card Slot |
| Programmable Tailstock |
| Rigid Tapping |
| Coolant System |
| Foot Switch |
| Chip Conveyor |
| Capacity: |
|---|
| Max Turning Diameter: 930 mm |
| Max Turning Length: 2,550 mm |
| Max Bar Capacity: 236 mm |
| Swing Over Bed: 691 mm |
| Swing Over Cross slide: 599 mm |
| Distance Between Centers: 2,501 mm |
| Travels: |
|---|
| X Axis Travel : 320 mm |
| Z Axis Travel: 2,499 mm |
| W Axis Travel: 2,261 mm ? |
| Rapid Traverse X Axis: 630 IPM |
| Rapid Traverse Z Axis: 630 IPM |
| Spindle: |
|---|
| Spindle Nose: A2-15 |
| Spindle Bore: 274 mm |
| Spindle Speed: 10 - 750 RPM |
| Spindle Motor: 60 HP |
| Turret: |
|---|
| Turret Capacity: 12 Stations |
| Turret Index Time: 0.4 Second |
| Tailstock: |
|---|
| Tailstock Body Travel: 2,202 mm |
| Tailstock Taper: MT-4 |
| Tailstock Quill Dia.: 201 mm |
| Tailstock Quill Travel: 201 mm |
| General: |
|---|
| Power Source: AC 220v / 3-Phase / 60 Hz |
| Machine Dimensions: 6,985 mm x 2,896 mm x 2,921 mm High |
| Machine Weight: 50,000 lbs Approx. |
| Make | JOHNFORD |
|---|---|
| Model | HT-100E-2D |
| Categories | CNC Lathes & Turning Centers |
Payment Terms
A booking deposit secures the machine, with the remaining balance due prior to loading or shipment. We accept bank transfer, wire transfer, and approved payment methods.
Shipping & Logistics
We coordinate domestic and international shipping, including loading, containerization, and freight arrangements through trusted logistics partners.
Machine Inspection
Buyers can request a live video demonstration, machine inspection, or schedule an on-site visit before completing the purchase.
Export & Documentation
For international orders, we can assist with export documentation, commercial paperwork, and pre-shipment inspection requirements.
Related Products
Sold
You Might Like
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
