*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Okuma |
| Model: | LU-15 |
| Machine Type: | CNC Turning Center |
| Equipped With: |
|---|
| Okuma OSP7000L CNC Control |
| Hand-Held Remote Control |
| 10″ 3-Jaw Chuck |
| 12-Position Upper Turret |
| 8-Position Lower Turret |
| Tailstock |
| Space Saver 2000 Bar Feed |
| Coolant System |
| Chip Conveyor / Chip Management System |
| Enclosed Work Area |
| Capacity: |
|---|
| Swing Over Bed: 20.87″ |
| Swing Over Carriage: 14.96″ |
| Swing Over Cross Slide: 12.99″ |
| Maximum Turning Diameter: 10.63″ |
| Maximum Turning Length: 23.62″ |
| Chuck Size: 10″ |
| Bar Capacity: 2.5″–2.75″ |
| Spindle Bore: 3.15″ |
| Travels: |
|---|
| X-Axis Travel – Upper Turret: 10.24″ |
| X-Axis Travel – Lower Turret: 5.51″ |
| Z-Axis Travel – Upper Turret: 25.20″ |
| Z-Axis Travel – Lower Turret: 24.21″ |
| Rapid Traverse X-Axis: 590 IPM |
| Rapid Traverse Z-Axis: 787 IPM |
| Spindle: |
|---|
| Spindle Speed: Up to 4,500 RPM |
| Spindle Motor: 30 HP |
| Spindle Bore: 3.15″ |
| Spindle Nose: A2-6 |
| Turret: |
|---|
| Upper Turret: 12 Positions |
| Lower Turret: 8 Positions |
| Total Tool Positions: 20 |
| Tailstock: |
|---|
| Quill Diameter: 3.54″ |
| Quill Travel: 4.72″ |
| Quill Taper: MT-5 |
| General: |
|---|
| Power Source: 208/220V / 3-Phase |
| Machine Dimensions (Approx.): 156″ L × 84″ W × 76″ H |
| Machine Weight (Approx.): 12,000 lbs. |
