Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
| Make: | MAZAK |
| Model: | INTEGREX 300-IVS |
| Year: | 2008 |
| Equipped With: |
|---|
| Mazatrol Matrix CNC Control |
| 12,000 RPM Pendulum Milling Head |
| 40-Station Tool Magazine |
| Sub Spindle |
| Y Axis Capability |
| Tool Presetter |
| Parts Catcher |
| 10″ Kitagawa 3-Jaw Chuck on Main Spindle |
| 10″ Kitagawa 3-Jaw Chuck on Sub Spindle |
| Servo Controlled C-Axis on Both Spindles |
| USB LAN Options |
| EIA/ISO Programming |
| 3D Coordinate Conversion |
| Rigid Tapping |
| PCMCIA Card Slot |
| High Pressure Coolant |
| Chiller Unit |
| Coolant Tank |
| Chip Conveyor |
| Foot Operated Control for Chuck |
| Levelling Pads |
| Capacity: |
|---|
| Max Turning Diameter: 30″ |
| Max Turning Length: 60″ |
| Max Bar Capacity: 3.1″ |
| Swing Over Bed: 30.0″ |
| Distance Between Centers: 60″ |
| Travel: |
|---|
| X Axis Travel: 24.80″ |
| Y Axis Travel: 9.06″ (+/- 4.53″) |
| Z Axis Travel: 62.40″ |
| B Axis Travel: 225 Degree |
| C Axis: 360 Degree (0.001) |
| X Rapid Traverse Rate: 1,496 Inch Per Minute |
| Y Rapid Traverse Rate: 1,024 Inch Per Minute |
| Z Rapid Traverse Rate: 1,496 Inch Per Minute |
| Spindle: |
|---|
| Spindle Nose: A2-8 |
| Spindle Bore: 3.46″ |
| Spindle Speed: 4,000 RPM |
| Spindle Motor: 40 HP |
| Sub Spindle: |
|---|
| Spindle Nose: A2-6 |
| Spindle Speed: 4,000 RPM |
| Spindle Motor: 30 HP |
| Milling Head: |
|---|
| Single Station Pendulum Head with 40 ATC |
| Spindle Speed: 15-12,000 RPM |
| Spindle Motor: 25 HP |
| Spindle 90° Index Time: 0.5 sec |
| General: |
|---|
| Power Source: AC 400 V / Three Phase / 50/60 Hz |
| Power Requirement: 95.2 kVA |
| Overall Dimensions: 193.4″ x 93.0″ x 110.2″ High |
| Weight: 27,940 lbs Approx. |
