*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | OKUMA |
| Model: | LT 10-M |
| Year: | 1997 |
| Condition: | Used |
| Machine Type: | CNC Turning Center |
| CNC Control: | OKUMA OSP Control |
| Equipped With: |
|---|
| Live Tooling Capability |
| Dual Spindle Configuration |
| Left and Right Equivalent Spindles |
| Upper and Lower Turrets |
| 12 Stations on Each Turret |
| Drive Units for Both Turrets – All Stations |
| 2 × C-Axes with Automatic Spindle Interpolation |
| 2 × Partial Hollow Clamping Devices |
| 1 × Lifting Station |
| Chip Conveyor |
| Coolant System |
| Fully Enclosed Machine Construction |
| Capacity: |
|---|
| Number of Spindles: 2 |
| Spindle Speed: 6,000 RPM |
| Minimum Cycle Time: 40 Seconds |
| Spindle: |
|---|
| Maximum Spindle Speed: 6,000 RPM |
| Turret: |
|---|
| Upper Turret: 12 Stations |
| Lower Turret: 12 Stations |
| Total Turret Stations: 24 |
| Travels: |
|---|
| X-Axis Movement: 7.68″ |
| Z-Axis Movement: 27.56″ |
| Rapid Traverse Rates: |
|---|
| Vertical Rapid Traverse: 3,150 IPM |
| Horizontal Rapid Traverse: 3,937 IPM |
| General: |
|---|
| Overall Dimensions (L × W × H): 106.30″ × 82.68″ × 70.87″ |
| Machine Weight: 13,228 lbs |
