Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
| Features: |
|---|
| Haas CNC Control |
| Haas VOP-D Packag |
| 12,000 RPM High-Speed Spindle |
| 24-Station Super Speed Tool Changer |
| Through Spindle Coolant |
| Inline Direct Drive Spindle |
| Renishaw Receiver Installed |
| 1,400 IPM Fast Rapid |
| Rigid Tapping |
| Coolant Tank |
| Chip Auger |
| Table: |
|---|
| Length: 36.0″ |
| Width: 14.0″ |
| Number of Standard T-Slots: 3 |
| T-Slot Width: 5/8″ |
| Maximum Weight on Table: 1,500 lbs |
| Travel: |
|---|
| X-Axis Travel: 30″ |
| Y-Axis Travel: 16″ |
| Z-Axis Travel: 20″ |
| Rapid Traverse Rates: 1,400 IPM |
| Cutting Feed Rates: 883 IPM |
| Spindle Nose to Table (Min.-Max.): 4″ – 24″ |
| Automatic Tool Changer: |
|---|
| Capacity: 24 Stations |
| Maximum Tool Weight: 12 lbs |
| Maximum Tool Diameter (Full): 2.5″ |
| Maximum Tool Diameter (Adjacent Empty): 5″ |
| Maximum Tool Length: 11″ |
| Tool Changing Time: 1.8 Seconds |
| Spindle: |
|---|
| Taper Size: CAT-40 |
| Speed Range: 12,000 RPM |
| Spindle Power: 40 HP |
| General: |
|---|
| Air Required: 100 PSI, 4 SCFM |
| Power: 220V / 66 FLA / 3-Phase |
| Overall Dimensions: 101″ × 99″ × 101″ High |
| Weight: 8,380 lbs |
