*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Haas |
| Model: | VF6SS |
| Year: | 2009 |
| Condition: | Used – Good |
| Equipped With: |
|---|
| Haas CNC Control |
| 4th Axis Drive and Wiring (Upgraded $3,595 value Included) |
| 12,000 RPM Inline Direct Drive Spindle |
| 40 HP Vector Drive |
| 24 Station High Speed Tool Changer |
| Linear Scales |
| Through Spindle Coolant – 300 psi (Upgraded $7,095 value Included) |
| Renishaw Probing System (Probe Needed) (Upgraded $6,395 value Included) |
| Rigid Tapping |
| Spindle Orientation |
| Quick Code Programming |
| Rotation and Scaling |
| Macros |
| DNC Enabled |
| Floppy Enabled |
| Coolant System |
| Chip Auger |
| Travels: |
|---|
| X-axis: 64″ |
| Y-Axis: 32″ |
| Z-Axis: 30″ |
| Rapid Traverse Rates: 1200 IPM |
| Cutting Feed Rates: 833 IPM |
| Spindle Nose To Table (Min.- Max.): 4″ – 34″ |
| Table: |
|---|
| Length: 64″ |
| Width: 28″ |
| Number Of Std T-slots: 5 |
| T-Slot Width: 5/8″ |
| Max Weight On Table: 2000 Lbs |
| Spindle: |
|---|
| Taper Size: CAT-40 |
| Speed Range: 12,000 RPM |
| Spindle Power: 40 HP |
| Vector Drive Max Torque: 90ft-lb @ 2000 RPM |
| Automatic Tool Changer: |
|---|
| Capacity: 24 Station Side Mounted |
| Tool Weight: 12 Lbs |
| Max Tool Diameter (Full): 2.5″ |
| Max Tool Diameter (adjacent empty): 5″ |
| Max Tool Length: 16″ |
| Tool Changing Time: 3.2 Seconds |
| General: |
|---|
| Air Required: 100 psi, 4 scfm |
| Power: 220v / 66FLA / 3-Phase |
| Overall Dimensions: 195″ x 102″ x 130″ High |
| Weight: 22,300 lbs Approx. |
