-
-
-
Haas DT-2 CNC Drill Tap Center - 2017 4th Axis Ready, 15,000 RPM, WIPS, HSM Mill
$999$999×
( $500 payable in deposit )
- You cannot add that amount to the cart — we have 1 in stock and you already have 1 in your cart. View cart
Sold
Haas VF-6SS CNC Vertical Machining Center – 4th Axis Ready Mill
Out of stock
Used Haas VF-6SS CNC Vertical Machining Center for Sale.
Replacement Cost Over $185,000 with Similar Options.
| Location: | Lake Elsinore, CA |
| SKU: | 112967 |
| Make/Model: | Haas VF-6SS |
| Year: | 2009 |
| Condition: | Used – Good |
| Video: | No Video |
Add to WishlistRemove from Wishlist
Add to Wishlist
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Haas |
| Model: | VF6SS |
| Year: | 2009 |
| Condition: | Used – Good |
| Equipped With: |
|---|
| Haas CNC Control |
| 4th Axis Drive and Wiring (Upgraded $3,595 value Included) |
| 12,000 RPM Inline Direct Drive Spindle |
| 40 HP Vector Drive |
| 24 Station High Speed Tool Changer |
| Linear Scales |
| Through Spindle Coolant – 300 psi (Upgraded $7,095 value Included) |
| Renishaw Probing System (Probe Needed) (Upgraded $6,395 value Included) |
| Rigid Tapping |
| Spindle Orientation |
| Quick Code Programming |
| Rotation and Scaling |
| Macros |
| DNC Enabled |
| Floppy Enabled |
| Coolant System |
| Chip Auger |
| Travels: |
|---|
| X-axis: 64″ |
| Y-Axis: 32″ |
| Z-Axis: 30″ |
| Rapid Traverse Rates: 1200 IPM |
| Cutting Feed Rates: 833 IPM |
| Spindle Nose To Table (Min.- Max.): 4″ – 34″ |
| Table: |
|---|
| Length: 64″ |
| Width: 28″ |
| Number Of Std T-slots: 5 |
| T-Slot Width: 5/8″ |
| Max Weight On Table: 2000 Lbs |
| Spindle: |
|---|
| Taper Size: CAT-40 |
| Speed Range: 12,000 RPM |
| Spindle Power: 40 HP |
| Vector Drive Max Torque: 90ft-lb @ 2000 RPM |
| Automatic Tool Changer: |
|---|
| Capacity: 24 Station Side Mounted |
| Tool Weight: 12 Lbs |
| Max Tool Diameter (Full): 2.5″ |
| Max Tool Diameter (adjacent empty): 5″ |
| Max Tool Length: 16″ |
| Tool Changing Time: 3.2 Seconds |
| General: |
|---|
| Air Required: 100 psi, 4 scfm |
| Power: 220v / 66FLA / 3-Phase |
| Overall Dimensions: 195″ x 102″ x 130″ High |
| Weight: 22,300 lbs Approx. |
| Make | |
|---|---|
| Model | VF-6/40 |
| Categories | CNC Vertical Machining Center |
Related Products
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
You Might Like
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
