Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
| SKU: | 113667 |
| Make: | Mazak |
| Model: | VCN 510C-II |
| Equipped With: |
|---|
| Mazatrol Matrix Nexus 2 CNC Control |
| 12,000 RPM High-Speed Spindle |
| Through Spindle Coolant |
| 30-Station Automatic Tool Changer |
| CAT-40 Taper Spindle |
| Renishaw Receiver Installed |
| Tool Presetter |
| 25 HP High-Torque Spindle |
| MPG Handwheel Control |
| USB Ports |
| Rigid Tapping |
| Spindle Chiller Unit |
| Automatic Lubrication Unit |
| Coolant Tank |
| Chip Conveyor |
| Books & Manuals |
| Travels: |
|---|
| X-Axis Travel: 41.3″ |
| Y-Axis Travel: 20.8″ |
| Z-Axis Travel: 20.8″ |
| Rapid Traverse Rates: 1,417 IPM |
| Cutting Feed Rates: 787 IPM |
| Spindle Nose to Table (Min.-Max.): 5.9″ – 26″ |
| Table: |
|---|
| Length: 51.18″ |
| Width: 21.65″ |
| Number of Standard T-Slots: 5 |
| T-Slot Width: 5/8″ |
| Maximum Weight on Table: 2,646 lbs |
| Spindle: |
|---|
| Taper Size: CAT-40 |
| Speed Range: 12,000 RPM |
| Spindle Type: Direct Drive |
| Spindle Power: 25 HP |
| Automatic Tool Changer: |
|---|
| Capacity: 30-Station Side Mounted |
| Maximum Tool Weight: 17.63 lbs |
| Maximum Tool Diameter: 3.15″ |
| Maximum Tool Length: 13.78″ |
| Tool Changing Time: 1.3 Seconds |
| General: |
|---|
| Air Required: 80 psi, 4 scfm |
| Power: 208V / 35 kVA / 3-Phase / 50/60 Hz |
| Overall Dimensions: 120″ × 112″ × 114″ High |
| Weight: 15,180 lbs |
