Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
| Make: | Haas |
| Model: | DT-2 |
| Year: | 2018 |
| Features: |
|---|
| Haas CNC Control |
| Linear Ways Construction |
| 4th-Axis Drive and Wiring (Upgraded $3,795 Value Included) |
| 15,000 RPM Spindle (Upgraded $14,695 Value Included) |
| BT-30 Spindle Taper |
| Renishaw Receiver Installed (Upgraded $5,795 Value Included) |
| Tool Presetter |
| High Speed Machining (Upgraded $3,995 Value Included) |
| 20-Station Automatic Tool Changer |
| Rigid Tapping |
| Spindle Orientation |
| Coolant Tank |
| Chip Auger (Upgraded $4,295 Value Included) |
| Leveling Pads |
| Books & Manuals |
| Travels: |
|---|
| X-Axis Travel: 28.0″ |
| Y-Axis Travel: 16.0″ |
| Z-Axis Travel: 15.5″ |
| Rapid Traverse Rates: 2,400 IPM |
| Cutting Feed Rates: 1,200 IPM |
| Spindle Nose to Table (Min.-Max.): 6″ – 21.5″ |
| Table: |
|---|
| Length: 34.0″ |
| Width: 15.0″ |
| Number of Standard T-Slots: 3 |
| T-Slot Width: 5/8″ |
| Maximum Weight on Table: 500 lbs |
| Spindle: |
|---|
| Taper Size: BT-30 |
| Maximum Speed: 15,000 RPM |
| Maximum Tapping Speed: 5,000 RPM |
| Spindle Power: 15 HP |
| Automatic Tool Changer: |
|---|
| Capacity: 20 Tools |
| Maximum Tool Weight: 5.5 lbs |
| Maximum Tool Diameter: 2.0″ |
| Maximum Tool Length: 7″ |
| Tool Changing Time: 2 Seconds |
| General: |
|---|
| Air Required: 100 psi, 4 scfm |
| Power: 220V / 66 FLA / 3-Phase |
| Overall Dimensions: 100″ × 91″ × 99″ High |
| Weight: 5,350 lbs |
