Sold
DOOSAN DNM-650 Vertical Machining Center
Out of stock
| SKU |
1970 |
| Make |
DOOSAN |
| Model No. |
DNM-650 |
| Serial # |
MV0011-000986 |
| Year |
2013/2014 |
| Cutting Hours |
|
| Condition |
Good Working |
| SKU |
1970 |
| Make |
DOOSAN |
| Model No. |
DNM-650 |
| Serial # |
MV0011-000986 |
| Year |
2013/2014 |
| Cutting Hours |
|
| Condition |
Good Working |
| DOOSAN DNM-650 Features: |
| Doosan Fanuc i Series CNC Control |
| Through Spindle Coolant |
| 8,000 RPM Big Plus Spindle |
| RBA-320L Big Bore Rotary Table ( $37,000 Option ) |
| Rotary Support Spindle W/Fixture Plate ($14,400 Option ) |
| USB & PCMCIA Interface |
| 1417 Inch Per Min Rapids |
| PCMCIA Card Slot |
| MPG Control |
| Rigid Tapping |
| Spindle Orientation |
| 30 Automatic high speed tool changer |
| Spindle Chiller |
| High Pressure Coolant System |
| Chip Blaster Unit |
| Chip Conveyor |
| Specifications: |
| Travels |
| X-Axis: 50.7″ |
| Y-Axis: 26.1″ |
| Z-Axis: 25.0″ |
| Rapid Traverse Rates: 1417″ Per Minute |
| Feed Rates: 590″ Per Minute |
| Spindle Nose to Table (Min.- Max.): 5.9″ – 30.9″ |
| Table: |
| Length: 51.2″ |
| Width: 26.37″ |
| Number of Std T-Slots: 5 |
| T-Slot Width: 5/8″ |
| Max Weight on Table: 2200 lbs |
| Spindle: |
| Spindle: Taper Size: 40 |
| Speed Range: 0 – 8,000 RPM |
| Spindle Type: Belt Drive |
| Spindle Power: 30 HP |
| Automatic Tool Changer: |
| Capacity: 30 |
| Tool Weight: 17.6 lbs |
| Max Tool Dia: 3.54″ |
| Max Tool Length: 11.8″ |
| Tool Changing Time: 1.3 Seconds |
| General: |
| Air Required: 80 psi, 4 scfm |
| Power: 220v / 35 kva / 3-Phase |
| Overall Dimensions: 150″ x 100″ x 110″ High |
| Weight: 16,500 lbs |
You Might Like
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
Browse all In Stock Machines for
Doosan DNM Series
Inquiry for DOOSAN DNM-650 Vertical Machining Center
