| USED-CLAUSING COLCHESTER GAPPED BED ENGINE LATHE | |
|---|---|
| Make | Clausing |
| Model No. | 8055 |
| Condition | Very Good |
- Features:
- 12″ Three-Jaw Buck Chuck
- Gamet “Micron” precision tapered roller spindle bearings
- All headstock gears are hardened and ground
- Shafts are splined and run on anti-friction bearings
- (16) All geared speeds in geometric progression
- Forward/reverse spindle clutch
- Universal gearbox with english/ metric threading
- Automatic kick-out feed on apron
- Electro-magnetic spindle brake
- Induction hardened bedways
- Massive one-piece cast iron bed
- Easy access pull-out chip bin
- Specifications:
- Capacities:
- Swing Over Bed: 17″
- Swing in Gap: 28″
- Distance Between Centers: 80″
- Swing Over Cross Slide: 10″
- Spindle:
- Thru Hole: 3-1/16″
- Spindle Nose: D1-8 Camlock
- Spindle Center: #5 MT
- No. of Speeds: 16
- Spindle speed range: 20 – 1,600 rpm
- Threads & Feeds:
- Standard Threads: (38) 2 – 72
- Metric Threads: (40) 4 – 14
- Leadscrew Diameter: 1-1/2″-4 Acme
- Feed Rod Diameter: 1-1/8″
- Cross Feeds: .001″ to .016″
- Longitudinual Feeds: (45) 0.002″ – 0.032″
- Carriage:
- Length on Bed: 20″
- Width of Bridge: 9-1/4″
- Cross Slide Travel: 12-1/4″
- Compound Slide Travel: 6″
- Tool Block Opening: 2″
- Tailstock:
- Spindle Taper: #5 Morse Taper
- Spindle Diameter: 2-15/16″
- Spindle Travel: 8-1/2″
- Bed:
- Width: 13-1/2″
- Depth: 13-1/4″, 16-1/4″ at the ends
- General:
- Motor: 10 Horsepower 1800 RPM, 3 Phase, 230/460 Volt
- Electrical: 440 3 Phase
- Overall Dimensions: 138″ x 42″ x 52″
- Approx. Weight: 6,000 lbs
USED-CLAUSING COLCHESTER GAPPED BED ENGINE LATHE
PAYMENT: Banker’s check or wire transfer are preferred when dealing with transactions that exceed $1000. Any purchase of over $1000 will come with an extra 3% charge when paying through Paypal or with a Credit/Debit Card. All major credit cards are accepted.
MACHINE USE AND SAFETY: Buyer acknowledges that the Seller has no knowledge or control over the application of these goods by the Buyer. It is the Buyer’s (user’s), responsibility to provide proper safety devices, equipment and instructions for any particular use, and to take all necessary steps to confirm to all Federal, State or Local Government Safety Standards and including OSHA.
BUYER IS RESPONSIBLE FOR SCHEDULING TRANSPORTATION OF THIS MACHINE, AS WELL AS ALL COST TO MOVE IT. IF YOU NEED HELP WITH SCHEDULING, PLEASE CONTACT US AND WE WILL ASSIST YOU. WE SHIP GLOBALLY.
