Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
| Make: | Haas |
| Model: | VF-1 |
| Year: | 2010 |
| Features: |
|---|
| Haas CNC Control |
| Linear Ways Construction |
| 7,500 RPM Spindle |
| CAT-40 Spindle Taper |
| 24-Station Automatic Tool Changer |
| Rigid Tapping |
| Coolant Tank |
| Chip Auger |
| Travels: |
|---|
| X-Axis Travel: 20″ |
| Y-Axis Travel: 16″ |
| Z-Axis Travel: 20″ |
| Rapid Traverse Rates: 1,000 IPM |
| Cutting Feed Rates: 650 IPM |
| Spindle Nose to Table (Min.-Max.): 4″ – 24″ |
| Table: |
|---|
| Length: 26.0″ |
| Width: 14.0″ |
| Number of Standard T-Slots: 3 |
| T-Slot Width: 5/8″ |
| Maximum Weight on Table: 3,000 lbs |
| Spindle: |
|---|
| Taper Size: CAT-40 |
| Speed Range: 7,500 RPM |
| Spindle Power: 20 HP |
| Automatic Tool Changer: |
|---|
| Capacity: 24 Tools |
| Maximum Tool Weight: 12 lbs |
| Maximum Tool Diameter: 3.5″ |
| Tool Changing Time: 4.2 Seconds |
| General: |
|---|
| Air Required: 100 psi, 4 scfm |
| Power: 220V / 66 FLA / 3-Phase |
| Overall Dimensions: 101″ × 99″ × 101″ High |
| Weight: 7,800 lbs |
