Sold
Leblond-Regal-Geared-Head-Engine-Lathe-004.jpg

Leblond Regal Geared Head Engine Lathe

Make LeBlond
Model No. USA
Serial # 2C778
Condition Very Good
Out of stock
Make LeBlond
Model No. USA
Serial # 2C778
Condition Very Good
SKU: 1115
Leblond Regal Geared Head Engine Lathe Features:
Yuasa 8″ Three-Jaw Chuck.
Coolant System.
Taper Attachment.
Royal 5C Lever Collet Closer.
Steady Rest.
Leblond Regal Geared Head Engine Lathe Specifications:
Capacities:
Swing Over Bed: 15″
Swing Over Cross Slide: 9″
Swing Over Compount Slide: 3″
Distance Between Centers: 45″
Spindle:
Mount: L00
Thru Hole: 1-1/2″
Height from Floor to Center: 43-1/4″
Number of Speeds: 12
Speed Range: 45 to 1,800 rpm
Carriage:
Cross Slide Travel: 8″
Compount Slide Travel: 4″
Threads:
Inch: 4 to 224
Tailstock:
Spindle Taper: #3 Morse Taper
Spindle Diameter: 2″
Spindle Travel: 6″
Bed:
Width: 12-1/4″
Length: 69″
General:
Motor: 3 Horsepower, 220 / 440 Volt, 1,800 RPM, 8.6 / 4.3 Amps, 60 Hz
Electrical: 220 / 440 Volt, Three Phase
Overall Dimensions: 96″ x 40″ x 51″ tall

GUARANTEE: If any machine guaranteed by us does not prove satisfactory mechanically, the Purchaser may return it freight prepaid within 14 days from date of shipment and we will refund the purchase price in full. This does not apply to machine sold “as is” or “subject to inspection”. This guarantee applies only to machines which we own. The machine must be returned in the same condition that it left our warehouse. MachineStation shall not be responsible for any damage done by truckers, riggers, or other parties. Machine damaged in shipping are not covered under the return privilege.WARRANTY: Seller makes no warranties of any kind whatever, expressed, or implied. All specifications and descriptions of said goods are approximate, not binding and meant only as a guide. It is the Buyer’s responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods confirm to the Buyer’s requirement.MACHINE USE AND SAFETY: Buyer acknowledges that the goods described herein are pre-owned used goods which were neither designed or manufactured by the Seller, nor has the Seller knowledge of, or control over, the prior use or misuse of said goods: nor does the Seller have knowledge or control over the application of these goods by the Buyer. It is the Buyer’s (user’s), responsibility to provide proper safety devices, equipment and instructions for any particular use, and to take all necessary steps to confirm to all Federal, State or Local Government Safety Standards and including OSHA.

BUYER IS RESPONSIBLE FOR SCHEDULING TRANSPORTATION OF THIS MACHINE, AS WELL AS ALL COST TO MOVE IT. IF YOU NEED HELP WITH SCHEDULING, PLEASE CONTACT US AND WE WILL ASSIST YOU. WE SHIP GLOBALLY.

Leblond Regal Geared Head Engine Lathe Features:
Yuasa 203 mm Three-Jaw Chuck.
Coolant System.
Taper Attachment.
Royal 5C Lever Collet Closer.
Steady Rest.
Leblond Regal Geared Head Engine Lathe Specifications:
Capacities:
Swing Over Bed: 381 mm
Swing Over Cross Slide: 229 mm
Swing Over Compount Slide: 76 mm
Distance Between Centers: 1,143 mm
Spindle:
Mount: L00
Thru Hole: 1-1/51 mm
Height from Floor to Center: 43-1/102 mm
Number of Speeds: 12
Speed Range: 45 to 1,800 rpm
Carriage:
Cross Slide Travel: 203 mm
Compount Slide Travel: 102 mm
Threads:
Inch: 4 to 224
Tailstock:
Spindle Taper: #3 Morse Taper
Spindle Diameter: 51 mm
Spindle Travel: 152 mm
Bed:
Width: 12-1/102 mm
Length: 1,753 mm
General:
Motor: 3 Horsepower, 220 / 440 Volt, 1,800 RPM, 8.6 / 4.3 Amps, 60 Hz
Electrical: 220 / 440 Volt, Three Phase
Overall Dimensions: 2,438 mm x 1,016 mm x 1,295 mm tall
Leblond-Regal-Geared-Head-Engine-Lathe-004.jpg

Payment Terms

A booking deposit secures the machine, with the remaining balance due prior to loading or shipment. We accept bank transfer, wire transfer, and approved payment methods.

Shipping & Logistics

We coordinate domestic and international shipping, including loading, containerization, and freight arrangements through trusted logistics partners.

Machine Inspection

Buyers can request a live video demonstration, machine inspection, or schedule an on-site visit before completing the purchase.

Export & Documentation

For international orders, we can assist with export documentation, commercial paperwork, and pre-shipment inspection requirements.

Back to Top
Select Language
Product has been added to your cart
Max · MachineStation
Looking for a machine? I can check live inventory for you. 👋