*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Tos Varnsdorf |
| Model: | W100A |
| Year: | 1980 |
| Condition: | Used – Good |
| Features: |
|---|
| 3.94″ Spindle Diameter |
| 4th Axis Rotary Table |
| Heavy Table Load Capacities |
| Gear Head Spindle for Powerful Torque |
| Facing Chuck |
| Tailstock |
| DRO |
| Note: Machine is dismantled and Ready to be loaded on the Truck |
| Travels: |
|---|
| X Axis (Table Traverse Travel): 63.00″ |
| Y Axis (Headstock Vertical Travel): 44.09″ |
| Z Axis (Table Longitudinal Travel): 49.21″ |
| W Axis (Spindle Stroke): 27.6″ |
| Feed Rates: |
|---|
| Feeds For Boring – 32 Stages: 0.0008 – 0.47 inch/rev. |
| Feeds For Milling – 18 Stages: 0.71 – 35.43 inch/min |
| Rapid Travese (Spindle Stroke, Headstock and Trable): 110.24 inch/min |
| Rotary Table: |
|---|
| Length: 49.21″ |
| Width: 49.21″ |
| Max Weight on Table: 6,624 lbs |
| Indexing: 1 Degree |
| Spindle: |
|---|
| Spindle Diameter: 3.94″ |
| Spindle Range: 7.1 – 1,120 RPM |
| Spindle Taper: 50 |
| Power: 15 HP |
| Facing Head: |
|---|
| Daimeter: 23.62″ |
| Slide Travel: 8.26″ |
| Facing Diameter Max: 35.43″ |
| Speed Range: 7.1 – 224 RPM |
| General: |
|---|
| Power: 66FLA / 205-220v / 3-Phase |
| Machine Dimensions: 234″ x 118″ x 118″ High |
| Machine Weight: 30,905 lbs. Approx. |
