*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Mazak |
| Model No.: | Integrex i-100S Bartac-S |
| Year of Manufacture: | 2017 (Sold & Installed in 2021) |
| Equipped With: |
|---|
| Mazatrol SmoothX CNC Control |
| Comes With LNS Quick Load Servo III MI Bar Feeder |
| 5 Axis Simultaneous Machining |
| Royal Quick Grip Collet Chuck on Both Spindles |
| 12,000 RPM Pendulum Milling Head |
| 72 Station Tool Magazine |
| Sub Spindle |
| Tool Presetter |
| Y Axis Capability |
| Full C-Axis on Both Spindles |
| Rigid Tapping |
| High Pressure Coolant System |
| Mist Collector |
| Chip Conveyor |
| HSK Tool Holders |
| Capacity: |
|---|
| Max Machining Diameter: 19.7″ |
| Max Machining Length: 33.62″ |
| Max Swing Over Bed: 20.9″ |
| Max Bar Capacity: 4.0″ |
| Travel: |
|---|
| X Axis Travel: 17.72″ |
| Y Axis Travel: 8.27″ |
| Z Axis Travel: 35.59″ |
| W Axis Travel: 35.55″ |
| B Axis Travel: -30° ～ 210° |
| C Axis: 360 Degree (0.0001) |
| X Axis Rapid Traverse Rate: 1575 IPM |
| Y Axis Rapid Traverse Rate: 1575 IPM |
| Z Axis Rapid Traverse Rate: 1575 IPM |
| W Axis Rapid Traverse Rate: 1181 IPM |
| Main Spindle: |
|---|
| Spindle Bore: 4.4″ |
| Spindle Speed: 2000 RPM |
| Spindle Motor: 15 HP |
| Sub Spindle: |
|---|
| Spindle Bore: 2.4″ |
| Spindle Speed: 6000 RPM |
| Spindle Motor: 15 HP |
| Milling Spindle: |
|---|
| Milling Spindle Type: Single Station Pendulum Head with ATC |
| Tool Type: HSK A-63 |
| Spindle Speed: 12,000 RPM |
| Spindle Motor: 10 HP |
| Indexing Increments: 0.0001-degree |
| Automatic Tool Changer: |
|---|
| Capacity: 72 Station |
| Tool Type: HSK A-63 |
| Max Tool Diameter.: 3.5″ – 5.1″ |
| Max Tool Length: 9.84″ |
| General: |
|---|
| Power Source: AC 400/220 V, Three Phase, 50/60 Hz |
| Power Requirement: 46.8 Kva |
| Overall Dimensions: 127″ x 103″ x 98.5″ High |
| Weight: 23,320 lbs Approx. |
