*All specifications are approximations and are subject to verification. Comes as shown in the images.
Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: |
Okuma |
| Model No.: |
Captain L370MW |
| Year of Manufacture: |
2005 |
| Condition: |
Used |
| Machine Type: |
CNC Horizontal Turning Center |
| CNC Control: |
Okuma OSP CNC Control |
| Country of Origin: |
Japan |
| Equipped With: |
| Okuma OSP CNC Control |
| Sub Spindle |
| Live Tooling Capability |
| 12-Station Turret |
| Parts Catcher |
| Chip Conveyor |
| Coolant System |
| Full Enclosure |
| Capacity: |
| Max Turning Diameter: 14.96″ (380 mm) |
| Max Turning Length: 20.08″ (510 mm) |
| Chuck Size: 10″ |
| Bar Capacity: 3.15″ (80 mm) |
| Spindle Configuration: Main Spindle + Sub Spindle |
| Travels: |
| X-Axis Travel: 10.24″ (260 mm) |
| Z-Axis Travel: 20.08″ (510 mm) |
| Y-Axis Travel: ±2″ (50 mm approx., if equipped) |
| Spindle: |
| Main Spindle Speed: Up to 3,800 RPM |
| Sub Spindle Speed: Up to 3,800 RPM |
| Spindle Motor: 30 HP |
| Spindle Nose: A2-8 |
| Turret: |
| Turret Stations: 12 Positions |
| Tool Type: Live Tooling Capable |
| Turret Type: VDI / Bolt-on (depending on configuration) |
| Feed Rates: |
| Rapid Traverse (X/Z): 787 IPM |
| Feed Rate: Programmable (CNC Controlled) |
| Electrical: |
| Voltage: 200V |
| Phase: 3 Phase |
| Frequency: 50/60 Hz |
| Control Voltage: 24V |
| Dimensions: |
| Floor Space (L x W x H): 110″ x 75″ x 80″ H (approx.) |
| Machine Weight: 13,000 lbs |
| Additional Requirements: |
| Operator Access: 24″ – 36″ recommended |
| Maintenance Clearance: 36″ recommended |
| Chip Conveyor/Coolant Access: 36″ – 48″ (if equipped) |
| General: |
| Air Required: 80 PSI, ~4 SCFM |
| Power Requirement: 220V / ~30–35 kVA / 3-Phase |
